Marantz RC3001 manual Timer, Checking the Settings, Operation Settings

Page 22

2. TIMER

The timer function of the RC3001 can be used to send a preset remote controller command at a programmed time.

The Wizz.it 3 editor can be used to operate multiple devices. One Touch Operation (Macro) can also use the timer function for transmission.

CHECKING THE SETTINGS

1. Display the MAIN MENU on the LCD of the RC3001, then press the button next to the “TIMER” indicator.

2. The TIMER menu is displayed. Pressing the button next to the “CHECK” indicator on the LCD displays the timer settings.

When the LCD appears as shown below, the timer has not been set.

•Either press the ENTER button or wait three seconds for the LCD to automatically return to the TIMER menu.

•Pressing the Home button from the TIMER MENU screen returns the LCD to the MAIN MENU.


	OPERATION SETTINGS			ENGLISH
	1.	Press the button next to the “TIMER SET”		ENGLISH
	1.	Press the button next to the “TIMER SET”

indicator in the LCD in the TIMER menu screen to display the timer programming setting screen.

2. Use the numeric buttons (0 to 9) and cursor buttons (t and u) to set the time for the timer. After making the setting, press the ENTER button.

17

Image 22

Contents Model RC3001 User Guide For US and Canada Français EnglishEspañol DeutschDeutsch EnglishFrançais EspañolNota Sobre EL Reciclado Remarque Concernant LE RecyclageRECYCLING-HINWEIS Nota SUL RiciclaggioTable of Contents FeaturesAttach the battery case cover Load the Rechargeable BatteryPack Into the Remote Controller Before USEController, and connect the AC adapter Charging the Battery PackRemove the bottom cover of the remote To the charging terminal next to the USB portRemote controller display Remote ControllerCommand Home mode and the device modesRemote Controller LCD This jack connects to the supplied AC adapter This is a rod antenna for receiving RF signalsThis jack connects the supplied IR emitter cable Mounting Procedure Precautions InstallationMounting Location Precautions Mounting Procedure5mm Changing the IR / RF Settings Using the Remote Controller With Infrared RaysUsing the Remote Controller With Radio FrequencyConnecting the RX3001 with Other Devices Connecting to Marantz EquipmentConnecting to AN AC Adapter Connecting to NON-MARANTZ EquipmentConnect the supplied AC adapter to the DC jack Setting the Channel SetupSetting the IR Output Level Output 4+5+6 Output 1+2+3Setting the Group ID Selector Emitter Output Output signalDVD input command for Marantz AV Receiver RC3001 Button SettingsSleep Timer Basic OperationLearning Function Other OperationMain Menu Entering the Main MenuPress the button next to the displayed This screen changes to Home modeTo learn Operation Settings TimerChecking the Settings Press the button next to the Timer SETPress a button next to the Everyday or Operation ON/OFF Settings Either press the Enter button or waitSYS.SETUP Clock Clock SettingBacklightbacklightillumination Time Setting LCD Timer LCD timer setting LCD LCD SettingMessage Completed is displayed Beep Beep Sound Setting This sets the built-in beep sound in the RC3001MEM Clear Initialization Setting Reset Status IndicatorProgrammable Codes Specifications DC9V 800mA Up to 100kHz90g 0.2lbs MIN105mm 4-3/16insRepairs Cleaning of Equipment External SurfacesOthers If the equipment becomes heavily soiledIs a registered trademark