Marantz manual Beep Beep Sound Setting, This sets the built-in beep sound in the RC3001

Page 28

CONTRAST

(LCD CONTRAST ADJUSTMENT)

This enables the LCD contrast to be adjusted. Adjust for maximum visibility according to your viewing environment.

1. The LCD setting menu is displayed, and so press the buttons next to “CONTRAST” in the LCD display.

2. Press the side buttons (right: +, left: -) to adjust the contrast level.

After deciding the settings, press the ENTER button.

The message “COMPLETED” is displayed on the LCD to indicate that the setting is completed.

•Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu.

•Pressing the Home button returns the LCD to the MAIN MENU.

	BEEP (BEEP SOUND SETTING)		ENGLISH
	This sets the built-in beep sound in the RC3001.

	1. Press the button next to the “BEEP”
	indicator in the SYS.SETUP menu screen
	in the LCD to display the beep setting
	screen.

2. Press the button next to the “ENABLE” or “DISABLE” indicators on the LCD to either enable or disable the beep sound.

3. Either press the ENTER button or wait three seconds so that “ENABLE” or “DISABLE” is displayed on the LCD and the settings are automatically completed.

•Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS. SETUP menu.

•Pressing the Home button returns the LCD to the MAIN MENU.

23

Image 28

Contents Model RC3001 User Guide For US and Canada English EspañolFrançais DeutschEnglish FrançaisDeutsch EspañolRemarque Concernant LE Recyclage RECYCLING-HINWEISNota Sobre EL Reciclado Nota SUL RiciclaggioTable of Contents FeaturesLoad the Rechargeable Battery Pack Into the Remote ControllerAttach the battery case cover Before USECharging the Battery Pack Remove the bottom cover of the remoteController, and connect the AC adapter To the charging terminal next to the USB portRemote Controller CommandRemote controller display Home mode and the device modesRemote Controller LCD This jack connects to the supplied AC adapter This is a rod antenna for receiving RF signalsThis jack connects the supplied IR emitter cable Installation Mounting Location PrecautionsMounting Procedure Precautions Mounting Procedure5mm Using the Remote Controller With Infrared Rays Using the Remote ControllerChanging the IR / RF Settings With Radio FrequencyConnecting the RX3001 with Other Devices Connecting to Marantz EquipmentConnecting to AN AC Adapter Connecting to NON-MARANTZ EquipmentConnect the supplied AC adapter to the DC jack Setup Setting the IR Output LevelSetting the Channel Output 4+5+6 Output 1+2+3Setting the Group ID Selector Emitter Output Output signalRC3001 Button Settings Sleep TimerDVD input command for Marantz AV Receiver Basic OperationOther Operation Main MenuLearning Function Entering the Main MenuPress the button next to the displayed This screen changes to Home modeTo learn Timer Checking the SettingsOperation Settings Press the button next to the Timer SETPress a button next to the Everyday or Operation ON/OFF Settings Either press the Enter button or waitSYS.SETUP Clock Clock SettingBacklightbacklightillumination Time Setting LCD Timer LCD timer setting LCD LCD SettingMessage Completed is displayed Beep Beep Sound Setting This sets the built-in beep sound in the RC3001MEM Clear Initialization Setting Reset Status IndicatorProgrammable Codes Specifications Up to 100kHz 90g 0.2lbsDC9V 800mA MIN105mm 4-3/16insCleaning of Equipment External Surfaces OthersRepairs If the equipment becomes heavily soiledIs a registered trademark