Pioneer DVR-RT501-S How to install the batteries, Use dry cell batteries type AAA/R03

2H30301B_En_12_17

15

If bright sunlight

directly beams onto the unit

front.

If the batteries have not been installed according to their polarities.

approx.

7m

Distance of Remote Control Operation

Point the remote

control directly at the

remote sensor.

The remote control handset will not work properly in the following cases:

Effective angle: approx. 60°

D3-4-2-3-1_En

Before using your unit 01

How to install the batteries

Use dry cell batteries type AAA/R03.

These batteries are offered as carbon / zinc-type. You may use both, but do not mix types.

Note: Flat, weak batteries will leak. Corrosive electrolyte will damage the remote control handset.

Leak proof batteries will not leak immediately when they are flat. As long as the handset is still working, there is no danger of leakage. To prevent damage, remove the batteries if you do not use the handset for several months.

Damage because of leakage is not covered by the guarantee.

When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area.

1 Open the battery compartment	2 Install two AAA/R03 batteries	3 Replace the compartment
cover in the direction of the	(supplied), paying attention to the	cover.
arrow.	polarity diagram in the battery
	compartment.

If an obstacle is placed between the unit and the handset.

If the batteries are weak.

15

En

8/4/05, 19:20