Pioneer DVR-RT501-S operating instructions Recording format, VR mode, Video mode

Page 10

01Before using your unit

Discs on which video can be re- corded

To record video with this unit, use the discs below:

Media type

Logo mark

DVD-RW Ver.1.0 Ver.1.1 Ver.1.2

Ver.1.1CPRM support

Ver.1.2CPRM support

DVD-R Ver.2.0 and Ver. 2.0/4x/8x

DVD-RW

¥The disc can be erased and used again about 1,000 times.

¥Only the VR mode can be used for Ver.1.0 discs.

¥With Ver.1.1/1.2 discs, you can record by select- ing the VR mode or Video mode.

¥When you record in the VR mode, you can repeat- edly record and erase. By erasing unnecessary titles, you effectively increase remaining time.

¥When you record in the Video mode, you can record until the disc becomes full.

¥When you use the Video mode, you can newly record on the disc by formatting the disc. How- ever, if the disc is formatted, all the recorded contents will be erased.

DVD-R

¥You can record on the disc only in the Video mode.

¥You can record until the disc becomes full.

¥Finalising the discs allows playback on other DVD players. However, the finalised discs can no longer be recorded.

¥Discs can be recorded to repeatedly until they are finalised.

NOTES:

¥There are some players that cannot playback discs that were recorded with this unit. We cannot guarantee the playback with other units.

¥This unit cannot record on DVD-R and DVD-RW discs that are 8 cm in diameter.

¥This unit cannot record on CD-R or CD-RW.

¥This unit may not be able to record to or playback from discs that have been recorded on other units due to the recording conditions, surface dirt or scratches.

¥Other units may not be able to record to or playback from discs that have been recorded on the unit due to the recording conditions, surface dirt or scratches.

10

En

Recording format

This unit has two modes for formatting discs for recording: VR mode and Video mode.

When a blank, new disc is loaded into this unit, the automatic format function starts to format the disc. (For the disc format setting in this step, see page 23.)

VR mode

¥This mode can be used for DVD-RW.

¥In this mode, the discs can be recorded and edited repeatedly.

¥The disc recorded in this mode can be played back with other DVD-RW-compatible players.

¥When a Ver.1.1 CPRM or Ver.1.2 CPRM disc is used, you can record a ÒCopy OnceÓ program (see page 51).

Video mode

¥This mode can be used for DVD-R and DVD-RW (Ver.1.1/1.2).

¥When you finalise the disc after recording, the disc recorded with this unit can be played back with other DVD players.

¥Recording, editing or playback of an unfinalised disc can be done only with this unit. However, there are some limitation to editing operations.

¥In this mode, you cannot record a ÒCopy OnceÓ program (see page 51).

¥When you record a TV program of a bilingual broadcast, only one of the audio modes can be recorded. You have to select it.

Format modes that can be used with each disc

The usable format depends on the media type as shown in the below table.

Media type

Format

Available functions

 

 

 

DVD-RW

VR mode

Playback, recording and

(Ver.1.0)

 

editing (Original/playlist)

 

 

 

DVD-RW

VR mode

Playback, recording and

(Ver.1.1 and

 

editing (Original/playlist)

Ver.1.2)

 

 

Video

Playback and recording

 

 

mode

Editing (with limitation)

 

 

 

DVD-R

Video

Playback and recording

(Ver.2.0 and

mode

Editing (with limitation)

Ver. 2.0/4x/8x)

 

 

 

 

 

2H30301B_En_04_11

10

8/4/05, 19:19

Image 10
Contents DVR-RT501-s Risk of Electric Shock Do not Open For USE in the United Operating EnvironmentKingdom Contents Tape playback Media markWhat is Moisture CONDENSATION? PrecautionsBefore using your unit When YOU Experience the Above CONDI- TionsAccessories CopyrightRecording function FeaturesPlayback function Edit functionRegion management information DiscDiscs which can be played back Operating DVD-VideoRecording format VR modeVideo mode Format modes that can be used with each discDisc playback in other players When recording in the VR modeWhen recording in the Video mode Title/Chapter/TrackChannel +/Ð Parts and functionsFront STANDBY/ONCD-RW SP/LPCD-R DVDRemote control DVD/VCRHow to install the batteries Use dry cell batteries type AAA/R03Playback connection Connecting this unit to your TV using the Scart connectionsBasic connections Connection to a Satellite ReceiverProgressive outputs Connect to a Stereo Amplifier with AudioOutput Interlaced outputsPreparation Automatic TV tuning and clock settingVarious settings BBCEnter Using the Setup MenuPreparation ReturnSetting the language Selectable languagesTo cancel the locked parental control level Setting the parental controlTemporarily cancelling parental control Selecting parental controlTo set the Auto Time Setting the clockSetting the disc You can format, protect, or finalise a discNEW Disc Format Dimmer Brightness of the display window Other System SetupSetting the screen DISPLAY/CALL Turning the screen display on or OFFVideo Still by FrameÒrgbó This section describes audio settings Setting the audioSetting the recording This section describes recording settingsDivX VOD Setting the otherÒUsing theSETUP Menuó onpage Be labelled EXT / AUX etcAutomatic station presetting Setting the channelTo skip a channel position Select Òtuningó tuning scale and press Various settings Replace TV station positionsManual TV station presetting Select Òmoveó and press EnterPress OPEN/CLOSE. The disc tray will open Playback procedureDisc playback ¥ If a non-compatible disc is loadedTitle menu will appear Playback by selecting a titlePress Title Menu Press Enter or PlayChecking media information Special playback Commercial skip Play mode screen will appearCommercial skip / Locating a specific scene Locating a specific sceneRepeat playback Repeat playbackOne touch repeat Title, Chapter repeat playbackTitle selection / DVD menu DVD menuZooming Changing angles / Zooming / SubtitlesChanging angles SubtitlesKaraoke playback Changing soundtrack language / Karaoke playbackChanging soundtrack language Vo. onExcluding specified track Various operations on CDPlaying back a selected track Press Title MENU/TOP MenuRepeat playback of all tracks Random playbackRepeat playback of selected track Playing back programsMP3/WMA/JPEG/DivX playback Using the Browser screenWhen the file to be displayed is selected Limitations on MP3/WMA/ JPEG/DivX file playbackWMA file specifications MP3 file specificationsPlaying back MP3/WMA files Press To select Jpeg file Jpeg file specificationPlaying back Jpeg files Next or the previous page. SeeDivX video file specifications Playing back DivX video filesDifferent scanning modes Interlaced scan Progressive scanProgressive scan Loading and unloading a cassette tape Tape playbackTo stop playback Forward/Reverse picture search modeCassette tape playback To rewind the tape or forward it rapidlyStill picture Adjusting tracking conditionPicture search Slow motionZero Return function Zero Return function / Video index searchsystemVideo index search system Types of disc Read this before recording on discRecording Recording modesCopy Free unrestricted recording Disc remaining timeImages that cannot be recorded Copy Never recording prohibitedPress the numeric keys or CH + / to Recording a TV programMODE/SPEED is pressed Press REC Appears on the screen for aboutTo stop recording To stop recording temporarilyTo cancel OTR One-touch Timer Recording OTRPress numeric keys or CH + / to select There are two ways to enter a Checking the channel setup to use the Video Plus+ systemVideo Plus+ programming system Guide CH noPress Video Plus+ Setting the timer program using the Video Plus+ systemUse the numeric keys to enter the PlusCode number TYPE!#$OK% Once Cancelling the timer recording Checking or changing the timer recordingCase Timer programs-overlap Timer REC SET screen will appear Timer recordingSetting timer recording Preparation PressPress or to select Òdateó and press Enter Select the recording mode and press EnterPress or to select Òtypeó and press Enter Press or to select Òchó and press EnterProgram Deleted Parts Stereo recording and playback Output selection for DVD VR mode Video mode DVD-RNicam programmes are divided into 4 types as shown below Original title Editing the discEditing the disc PlaylistEditing a playlist Creating a playlistChanging a title name Press Display to return the title menuErasing a scene Edit title Press Enter Edit Title screen appears+*,!%& * !# Combining the title Title MenuErasing a playlist Press Enter Selected playlist will be erasedEditing an original title Adding a chapter markCombining chapters Changing an original title name Erasing a scene Edit title Erasing an original title Changing a disc name Changing a disc nameYou can change a disc name from the title menu Inputting characters Editing the disc Using the keyboard screenKeyboard screen types There are two methods for inputting charactersErasing a character Cancelling character inputCancel Selecting between uppercase and lowercase lettersDubbing Dubbing a tape onto a discYou can record video or audio on a video tape onto a disc Dubbing only the specified titles or the playlist Dubbing a disc onto a tapeDubbing only a specified scene When a video is recorded using this unit Preparation Dubbing using other equipmentYou can connect another VCR or camcorder for dubbing Dubbing with A/V-cable or S-Video cable not supplied Dubbing Playback unit connectionDubbing with Scart cable not supplied DTS GlossaryAdditional information MP3Screen sizes and disc formats Setup MenuScreen sizes and disc formats Language code list Error/Warning message list Cause Possible SolutionsSymptoms Possible Solutions VCR/DVD Problems and troubleshootingDVD Resetting the recorder Video head cleaningVideo Head Clogging Other Additional information DontGeneral SpecificationsAccessories VCR sectionAdditional information Additional information Pioneer Corporation