Pioneer DVR-RT501-S Automatic TV tuning and clock setting, Various settings, Preparation, Bbc

Page 18

02Various settings

Automatic TV tuning and clock setting

Plug in your unit into the mains supply and it will start to automatically tune itself in and set the correct date and time. After setting itself up, you must set the TV to the video channel.

ONLY WHEN YOU PLUG IN THIS UNIT FOR THE FIRST TIME, THE AUTOMATIC SETUP WILL BE AVAILABLE.

AV3

STANDBY/ON

CHANNEL + / –

Preparation:

¥Make sure that your unit is connected properly to the TV.

¥If a satellite receiver is connected with the coaxial lead, make sure itÕs switched ON and set to SKY ONE.

¥Turn on the TV and select the channel you wish to allocate for video use.

1Plug in your unit's plug into the mains supply. ÒAutoÓ will start to flash in the unit display. And also ÒAUTO TUNINGÓ will be displayed on the TV screen. Your unit will automatically tune itself in and set the correct time and date (Depending on the reception condition, it may take approx. 10 minutes.)

2Press and hold the

STANDBY/ON button on the front of your unit in the Standby mode until RF output channel Ò36Ó will appear in the unit display.

3If you have used a 21 pin scart lead you now, simply select the AV channel on your TV and go to step 5. Tune the TV in the same way

as tuning in a TV broadcast station until the word

ÒTESTÓ flashes on the TV screen. Refer to the TV operating instructions for tuning. Now the output

18from the unit is tuned to this channel. Whenever

En

you want to play back a tape, select this channel.

4If there is interference from an adjacent broad- cast channel in the picture (wavy lines, picture roll, etc.), press the CHANNEL + / – buttons on your unit to select any other RF channel between 23 and 69, retuning your TV until the word ÒTESTÓ flashes on the TV screen. If you con- nected a satellite receiver as explained on page 16, you must switch off the VCRÕs transmitter. Press the unitÕs CHANNEL + / –

buttons repeatedly until OFF appears in the display window (OFF

will appear after 69 or before 23).

5Press the STANDBY/

ON button to turn OFF the unit. Now the TV is tuned to your unit.

NOTES:

¥The unit automatically corrects the clock setting every hour and automatically adjusts the clock setting for Daylight Saving Time.

¥Your unit will tune the TV stations as follows.

CH 1

BBC 1

CH 5

Channel 5

CH 2

BBC 2

CH 6

Satellite

CH 3

ITV

CH 7

etc.

CH 4

Channel 4

 

 

¥If you want to change the RF output channel or switch to ÒOFFÓ, press and hold the STANDBY/ON button on the front of your unit in the Standby mode until the current RF output channel appears. Press the CHANNEL + / – buttons on your unit to select the RF channel you desire.

2H30301B_En_18_29

18

8/4/05, 19:20

Page 17 Page 19
Image 18
Page 17 Page 19
Contents DVR-RT501-s Risk of Electric Shock Do not Open Operating Environment For USE in the UnitedKingdom Contents Tape playback Media markWhat is Moisture CONDENSATION? PrecautionsBefore using your unit When YOU Experience the Above CONDI- TionsAccessories CopyrightRecording function FeaturesPlayback function Edit functionRegion management information DiscDiscs which can be played back Operating DVD-VideoRecording format VR modeVideo mode Format modes that can be used with each discDisc playback in other players When recording in the VR modeWhen recording in the Video mode Title/Chapter/TrackChannel +/Ð Parts and functionsFront STANDBY/ONCD-RW SP/LPCD-R DVDRemote control DVD/VCRHow to install the batteries Use dry cell batteries type AAA/R03Playback connection Connecting this unit to your TV using the Scart connectionsBasic connections Connection to a Satellite ReceiverProgressive outputs Connect to a Stereo Amplifier with AudioOutput Interlaced outputsPreparation Automatic TV tuning and clock settingVarious settings BBCEnter Using the Setup MenuPreparation ReturnSetting the language Selectable languagesTo cancel the locked parental control level Setting the parental controlTemporarily cancelling parental control Selecting parental controlTo set the Auto Time Setting the clockSetting the disc You can format, protect, or finalise a discNEW Disc Format Dimmer Brightness of the display window Other System SetupSetting the screen DISPLAY/CALL Turning the screen display on or OFFStill by Frame VideoÒrgbó This section describes audio settings Setting the audioSetting the recording This section describes recording settingsDivX VOD Setting the otherÒUsing theSETUP Menuó onpage Be labelled EXT / AUX etcSetting the channel Automatic station presettingTo skip a channel position Select Òtuningó tuning scale and press Various settings Replace TV station positionsManual TV station presetting Select Òmoveó and press EnterPress OPEN/CLOSE. The disc tray will open Playback procedureDisc playback ¥ If a non-compatible disc is loadedTitle menu will appear Playback by selecting a titlePress Title Menu Press Enter or PlayChecking media information Special playback Commercial skip Play mode screen will appearCommercial skip / Locating a specific scene Locating a specific sceneRepeat playback Repeat playbackOne touch repeat Title, Chapter repeat playbackTitle selection / DVD menu DVD menuZooming Changing angles / Zooming / SubtitlesChanging angles SubtitlesKaraoke playback Changing soundtrack language / Karaoke playbackChanging soundtrack language Vo. onExcluding specified track Various operations on CDPlaying back a selected track Press Title MENU/TOP MenuRepeat playback of all tracks Random playbackRepeat playback of selected track Playing back programsMP3/WMA/JPEG/DivX playback Using the Browser screenWhen the file to be displayed is selected Limitations on MP3/WMA/ JPEG/DivX file playbackMP3 file specifications WMA file specificationsPlaying back MP3/WMA files Press To select Jpeg file Jpeg file specificationPlaying back Jpeg files Next or the previous page. SeeDivX video file specifications Playing back DivX video filesProgressive scan Different scanning modes Interlaced scanProgressive scan Loading and unloading a cassette tape Tape playbackTo stop playback Forward/Reverse picture search modeCassette tape playback To rewind the tape or forward it rapidlyStill picture Adjusting tracking conditionPicture search Slow motionZero Return function / Video index searchsystem Zero Return functionVideo index search system Types of disc Read this before recording on discRecording Recording modesCopy Free unrestricted recording Disc remaining timeImages that cannot be recorded Copy Never recording prohibitedPress the numeric keys or CH + / to Recording a TV programMODE/SPEED is pressed Press REC Appears on the screen for aboutTo stop recording To stop recording temporarilyOne-touch Timer Recording OTR To cancel OTRPress numeric keys or CH + / to select There are two ways to enter a Checking the channel setup to use the Video Plus+ systemVideo Plus+ programming system Guide CH noSetting the timer program using the Video Plus+ system Press Video Plus+Use the numeric keys to enter the PlusCode number TYPE!#$OK% Once Checking or changing the timer recording Cancelling the timer recordingCase Timer programs-overlap Timer REC SET screen will appear Timer recordingSetting timer recording Preparation PressPress or to select Òdateó and press Enter Select the recording mode and press EnterPress or to select Òtypeó and press Enter Press or to select Òchó and press EnterProgram Deleted Parts Output selection for DVD VR mode Video mode DVD-R Stereo recording and playbackNicam programmes are divided into 4 types as shown below Original title Editing the discEditing the disc PlaylistEditing a playlist Creating a playlistChanging a title name Press Display to return the title menuErasing a scene Edit title Press Enter Edit Title screen appears+*,!%& * !# Combining the title Title MenuErasing a playlist Press Enter Selected playlist will be erasedEditing an original title Adding a chapter markCombining chapters Changing an original title name Erasing a scene Edit title Erasing an original title Changing a disc name Changing a disc nameYou can change a disc name from the title menu Inputting characters Editing the disc Using the keyboard screenKeyboard screen types There are two methods for inputting charactersErasing a character Cancelling character inputCancel Selecting between uppercase and lowercase lettersDubbing a tape onto a disc DubbingYou can record video or audio on a video tape onto a disc Dubbing a disc onto a tape Dubbing only the specified titles or the playlistDubbing only a specified scene Dubbing using other equipment When a video is recorded using this unit PreparationYou can connect another VCR or camcorder for dubbing Dubbing Playback unit connection Dubbing with A/V-cable or S-Video cable not suppliedDubbing with Scart cable not supplied DTS GlossaryAdditional information MP3Setup Menu Screen sizes and disc formatsScreen sizes and disc formats Language code list Error/Warning message list Cause Possible SolutionsProblems and troubleshooting Symptoms Possible Solutions VCR/DVDDVD Video head cleaning Resetting the recorderVideo Head Clogging Other Additional information DontGeneral SpecificationsAccessories VCR sectionAdditional information Additional information Pioneer Corporation
Top Page Image Contents