Pioneer DVR-RT501-S operating instructions Program Deleted Parts

Page 61

Recording

NOTES:

¥Recording starts a few seconds before the preset starting time.

¥You cannot use the timer recording for the both DVD and VCR at the same time.

¥You can playback the DVD during the VCR timer recording, and you can playback the VCR during the DVD timer recording.

¥If a recordable tape is not inserted

or no disc space is available, the

timer record indicator Ò Ó flashes, and ÒTIMER RECORDING ERROR. PLEASE CHECK THE DISC OR TAPE.Ó appears on the screen. Replace the tape or disc to allow recording.

¥If you perform any operation during timer recording, the power will not go OFF when timer recording finishes. To turn the power OFF, press STANDBY/ON.

¥From about 2 minutes before timer recording starts, some operations cannot be done.

¥If you set recording to start less than 2 minutes ahead of time, the power will not turn OFF after recording finishes.

¥If the recording media fills up during

timer recording, Ò Ó will flash and the power will not turn OFF. Also, any timer recording scheduled for later is cancelled.

¥After setting the timer program with VPS/PDC is ÒONÓ, press TIMER REC then unit will automatically turn off.

05

SETUP MENU

 

 

TIMER REC SET

 

 

 

TYPE

 

 

ONCE

REC

REC

VPS/

 

 

TO

MODE

PDC

DATE (DD/MM)

20/11(THU)

 

 

 

START

 

 

20:00

 

 

 

END

 

 

23:00

 

 

 

CH

 

 

1

 

 

 

REC TO

 

 

DVD

 

 

 

REC MODE

 

LP

 

 

 

VPS/PDC

 

XP

LP

 

 

 

 

SP

 

 

 

 

 

 

 

 

 

 

 

OK LP

 

 

 

 

 

 

EP

 

 

 

 

 

SELECT

 

 

 

 

 

ENTER

ENTER

RETURN

BACK

SETUP

END

12 Select ÒOKÓ and press ENTER. The timer program is deter- mined and the TIMER REC SET screen appears again.

13 When you enter the other program for the timer recording, repeat the steps 3 to 12.

14 Press SETUP. The TIMER REC SET screen disappears and the display will return to the normal screen.

15 Press TIMER REC. The timer indicator Ò Ó will appear on the display and the unit stands by for recording.

¥If the program with ÒVPS/PDCÓ OFF is DVD recording only, the unit will change to VCR mode automatically. (The DVD mode cannot be selected.)

¥If the program with ÒVPS/PDCÓ OFF is VCR recording only, the unit will change to DVD mode automatically. (The VCR mode cannot be selected.)

¥If the programs with ÒVPS/PDCÓ OFF are DVD and VCR re- cording, the unit will turn off. Also if the program with ÒVPS/ PDCÓ ON is set, the unit will turn off. If you want to use the unit, press TIMER REC again to deactivate the timer.

¥If the clock symbol () blinks in the display in spite of the pressing of TIMER REC, the cassette may not have been loaded yet. (see page 46)

¥If the cassette is ejected in spite of the pressing of TIMER REC, the erase prevention tab of the cassette may have been removed. (see page 46)

Checking or changing the timer recording

When you want to check the selected timer recording, follow the steps 1 and 2 of ÒSetting timer recordingÓ and display the TIMER REC SET screen. To change the timer recording, select the program to be changed and press ENTER. The changing method is the same as that for the recording a program for the first time.

Cancelling the timer recording

Display the TIMER REC SET screen.

Select the program you want to cancel and press CANCEL, then the selected program will be erased from the timer recording list.

In case Timer programs-overlap

Do not overlap timer programs as portions of the conflicting programs will be lost. The first recording time has priority over the next recording time as shown in the diagram below.

In this case, the next recording time is delayed a maximum of about

2 minutes. Even when one timer recording is set to start at the same time as another is set to finish, the later timer recording will be delayed by up

to 2 minutes.

8 : 00

9 : 00

10 : 00

11 : 00

Program 1

 

 

 

 

Program 2

 

 

 

 

 

 

Deleted Parts

 

61

Program 3

 

Non Recorded Portion Parts

 

 

 

 

 

Recording

Prog.1

Prog.2

Prog.3

En

Control Settings

 

 

 

 

2H30301B_En_54_62

61

8/4/05, 19:24

Image 61
Contents DVR-RT501-s Risk of Electric Shock Do not Open For USE in the United Operating EnvironmentKingdom Contents Media mark Tape playbackBefore using your unit PrecautionsWhat is Moisture CONDENSATION? When YOU Experience the Above CONDI- TionsCopyright AccessoriesPlayback function FeaturesRecording function Edit functionDiscs which can be played back DiscRegion management information Operating DVD-VideoVideo mode VR modeRecording format Format modes that can be used with each discWhen recording in the Video mode When recording in the VR modeDisc playback in other players Title/Chapter/TrackFront Parts and functionsChannel +/Ð STANDBY/ONCD-R SP/LPCD-RW DVDDVD/VCR Remote controlUse dry cell batteries type AAA/R03 How to install the batteriesBasic connections Connecting this unit to your TV using the Scart connectionsPlayback connection Connection to a Satellite ReceiverOutput Connect to a Stereo Amplifier with AudioProgressive outputs Interlaced outputsVarious settings Automatic TV tuning and clock settingPreparation BBCPreparation Using the Setup MenuEnter ReturnSelectable languages Setting the languageTemporarily cancelling parental control Setting the parental controlTo cancel the locked parental control level Selecting parental controlSetting the disc Setting the clockTo set the Auto Time You can format, protect, or finalise a discNEW Disc Format Setting the screen Other System SetupDimmer Brightness of the display window DISPLAY/CALL Turning the screen display on or OFFVideo Still by FrameÒrgbó Setting the recording Setting the audioThis section describes audio settings This section describes recording settingsÒUsing theSETUP Menuó onpage Setting the otherDivX VOD Be labelled EXT / AUX etcAutomatic station presetting Setting the channelTo skip a channel position Manual TV station presetting Various settings Replace TV station positionsSelect Òtuningó tuning scale and press Select Òmoveó and press EnterDisc playback Playback procedurePress OPEN/CLOSE. The disc tray will open ¥ If a non-compatible disc is loadedPress Title Menu Playback by selecting a titleTitle menu will appear Press Enter or PlayChecking media information Special playback Commercial skip / Locating a specific scene Play mode screen will appearCommercial skip Locating a specific sceneOne touch repeat Repeat playbackRepeat playback Title, Chapter repeat playbackDVD menu Title selection / DVD menuChanging angles Changing angles / Zooming / SubtitlesZooming SubtitlesChanging soundtrack language Changing soundtrack language / Karaoke playbackKaraoke playback Vo. onPlaying back a selected track Various operations on CDExcluding specified track Press Title MENU/TOP MenuRepeat playback of selected track Random playbackRepeat playback of all tracks Playing back programsWhen the file to be displayed is selected Using the Browser screenMP3/WMA/JPEG/DivX playback Limitations on MP3/WMA/ JPEG/DivX file playbackWMA file specifications MP3 file specificationsPlaying back MP3/WMA files Playing back Jpeg files Jpeg file specificationPress To select Jpeg file Next or the previous page. SeePlaying back DivX video files DivX video file specificationsDifferent scanning modes Interlaced scan Progressive scanProgressive scan Tape playback Loading and unloading a cassette tapeCassette tape playback Forward/Reverse picture search modeTo stop playback To rewind the tape or forward it rapidlyPicture search Adjusting tracking conditionStill picture Slow motionZero Return function Zero Return function / Video index searchsystemVideo index search system Recording Read this before recording on discTypes of disc Recording modesImages that cannot be recorded Disc remaining timeCopy Free unrestricted recording Copy Never recording prohibitedMODE/SPEED is pressed Recording a TV programPress the numeric keys or CH + / to Press REC Appears on the screen for aboutTo stop recording temporarily To stop recordingTo cancel OTR One-touch Timer Recording OTRPress numeric keys or CH + / to select Video Plus+ programming system Checking the channel setup to use the Video Plus+ systemThere are two ways to enter a Guide CH noPress Video Plus+ Setting the timer program using the Video Plus+ systemUse the numeric keys to enter the PlusCode number TYPE!#$OK% Once Cancelling the timer recording Checking or changing the timer recordingCase Timer programs-overlap Setting timer recording Preparation Timer recordingTimer REC SET screen will appear PressPress or to select Òtypeó and press Enter Select the recording mode and press EnterPress or to select Òdateó and press Enter Press or to select Òchó and press EnterProgram Deleted Parts Stereo recording and playback Output selection for DVD VR mode Video mode DVD-RNicam programmes are divided into 4 types as shown below Editing the disc Editing the discOriginal title PlaylistCreating a playlist Editing a playlistPress Display to return the title menu Changing a title namePress Enter Edit Title screen appears Erasing a scene Edit title+*,!%& * !# Title Menu Combining the titlePress Enter Selected playlist will be erased Erasing a playlistAdding a chapter mark Editing an original titleCombining chapters Changing an original title name Erasing a scene Edit title Erasing an original title Changing a disc name Changing a disc nameYou can change a disc name from the title menu Keyboard screen types Editing the disc Using the keyboard screenInputting characters There are two methods for inputting charactersCancel Cancelling character inputErasing a character Selecting between uppercase and lowercase lettersDubbing Dubbing a tape onto a discYou can record video or audio on a video tape onto a disc Dubbing only the specified titles or the playlist Dubbing a disc onto a tapeDubbing only a specified scene When a video is recorded using this unit Preparation Dubbing using other equipmentYou can connect another VCR or camcorder for dubbing Dubbing with A/V-cable or S-Video cable not supplied Dubbing Playback unit connectionDubbing with Scart cable not supplied Additional information GlossaryDTS MP3Screen sizes and disc formats Setup MenuScreen sizes and disc formats Language code list Cause Possible Solutions Error/Warning message listSymptoms Possible Solutions VCR/DVD Problems and troubleshootingDVD Resetting the recorder Video head cleaningVideo Head Clogging Dont Other Additional informationAccessories SpecificationsGeneral VCR sectionAdditional information Additional information Pioneer Corporation