![](/images/new-backgrounds/1200966/200966155x1.webp)
07Dubbing
Dubbing a tape onto a disc
VR mode Video mode
VCR
You can record video or audio on a video tape onto a disc.
Preparation:
¥Turn ON the TV and select its AV channel (this may be labelled EXT / AUX etc.).
¥Load a source video tape and a disc for recording.
¥Remove the erase protection tab of the source video tape to prevent the data from accidentally being erased.
¥Confirm the disc space before operation.
1Press DVD/VCR to set this unit to DVD mode. The DVD indicator will light.
2Press REC MODE/SPEED and select the recording mode SP, LP, EP or XP.
¥The recording mode is indicated on both the TV screen and the display window.
¥For the details of the recording mode, see page 50.
3Press DVD/VCR and set the unit to VCR mode.
NOTE:
Confirm that the VCR indicator lights.
4Press DUBBING.
¥The unit is changed to DVD mode automatically.
¥The VCR is waiting for playback and the DVD is waiting for recording. Then the following message will appear.
NOTES:
¥ Dubbing cannot be accomplished |
when |
5Press DUBBING, or or
to select ÒYESÓ and press ENTER. Dubbing starts.
¥To cancel dubbing, press STOP, or select ÒNOÓ and press ENTER.
CONFIRM DUBBING FROM VCR TO DVD
YESNO
SELECT DUBBING YES
ENTER ENTER STOP NO
| - a copy protected tape is used. |
| - a finalised disc is used. |
| - disc protection is set. |
| - disc has no recording space. |
¥ | Dubbing stops when |
| - the video tape is played back to |
| the end and stops. |
| - recording space becomes full. |
| - the picture noise continues for 1 |
| minute. |
¥ | The videos recorded from TV |
| programs or movies can be used |
| only for your personal enjoyment |
| without permission of the copyright |
| holder. |
78
En
In dubbing, VCR playback, DVD recording and ÒdubÓ (dubbing)
indicatorappear on the display window. |
Press CLOCK/COUNTER to display the elapsed dubbing time in the display window.
6To stop dubbing, press STOP.
2H30301B_En_78_81 | 78 | 8/4/05, 19:26 |