Various settings
STILL MODE
You can set the type of image displayed on the TV screen when the playback of the DVD is stilled. Select ÒSTILL MODEÓ and select the image to be displayed from the list below.
AUTOMATIC
The field still or frame still is automatically selected. (For normal use.)
STILL BY FRAME
The frame still is set.
Note for the field still and frame still:
¥Field* still
Since only one field (half of the video information) is shown on the TV screen, the picture appears rough but does not shake.
¥Frame* still
Two fields are alternatively shown on the TV screen. The picture shakes but the resulting picture quality is superior to the field still pictures.
Field*: A field refers to the video information in
Frame*: A frame refers to the total area occupied by each picture on the TV screen.
NO NOISE BACKGROUND
When you select a channel where the broadcast has finished or no broadcast is set, the TV screen will automatically appear blue.
The function above works when you select ÒNO NOISE BACKGROUNDÓ and select ÒONÓ from the list. If you donÕt want to use this blue background function, select ÒOFFÓ.
The default setting is ÒONÓ.
BRIGHTNESS
You can control the brightness level of the image. Select ÒBRIGHTNESSÓ and select the level from the list below.
MAX: The image becomes brighter.
STD: The image is of standard brightness.
MIN: The image becomes darker.
02
DVD OUTPUT
You can select the output signal of DVD playback pic- ture to the TV screen as an RGB signal, a COMPO- NENT VIDEO signal or a
RGB:RGB signal(AV1)
COMPONENT: COMPONENT VIDEO signal
| (AV1) |
NOTES:
¥If you select COMPONENT, refer to the connections shown on page 17.
¥An RGB output is available when being connected to TV using SCART connector.
When you press STOP on the front panel for 5 sec- onds, DVD OUTPUT setting will be restored to
ÒRGBÓ.
¥Use the appropriate connection setting for your TV. Refer to the owner's manual for your TV for details.
¥Depending on its specifications, your TV may not be able to receive RGB output from this unit.
¥If you connect the unit to your TV with
AV3 INPUT
You must select the input mode of AV3 (front AV- input). (see the upper connection on page 81)
Only the | |
(DVD only) | input. |
| (Composite video signal will be |
| cut.) |
VIDEO: | Only the composite video signal |
| will be input. |
| will be cut.) |
25
En
2H30301B_En_18_29 | 25 | 8/4/05, 19:20 |