Recording
VCR
Auto Rewind feature
This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape.
NOTES:
¥If the disc space become full, the recording is stopped and ÒRECORDING INTERRUPTEDÓ will appear on the screen.
¥In the event of a power failure during DVD recording including OTR and TIMER REC, the program can not be recorded on the disc. When the power resumes, after theVCR/DVD is turned on, the set checks the disc to repair the error which is caused by a power failure. This checking process may require about 1 minute 30 seconds according to disc condition. In this process ÒSYSTEM ERROR PLEASE WAIT DISC CHECKINGÓ will appear on the screen.
05
To stop recording
Press STOP to stop recording.
NOTE:
When recording onto a DVD, even if STOP is pressed during recording, recording does not stop instantly due to the concluding process of recording. Recording may continue for as long as 1 minute maximam. While this pro- cess, ÒPROCESSING PLEASE WAITÓ will appear on the screen.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted material.
Ò4Ó will appear on screen for about 4 seconds.
Press again to resume recording.
NOTES:
¥In the recording onto a video tape, the pause function will be released after 5 minutes to prevent damage the video tape. The unit will change to the STOP mode.
¥When recording onto a video tape, you can change a recording channel in the recording pause mode. (You cannot change a recording channel in the DVD recording pause mode.)
¥Chapter marks are made when recording to a DVD in the VR Mode.
53
En
2H30301B_En_50_53 | 53 | 8/4/05, 19:23 |