Disc playback | 03 |
Progressive scan
The unit supports the progressive scanning system as well as the con- ventional interlaced scanning sys- tem. If yourTV is equipped with com- ponent video input jacks which sup- port the progressive video input,you can enjoy high quality picture by making the progressive scanning mode active.
Preparation:
•Change the DVD OUTPUT setting to COMPONENT and then con- nect the unit to a TV that is equipped with component jacks and supports progressive video input. (See page 25.)
•Turn ON the TV and set it to the corresponding video input mode.
•Press DVD/VCR to select the DVD mode. (The DVD indicator will light.)
1Press PROGRESSIVE in the stop mode. The PROGRESSIVE in- dicator ÒÓ on the display window will light.
•The unit recognizes the picture source (film or video) of the cur- rent disc according to the disc information.
2Press PLAY to start playback.
P
•To make the progressive scanning mode inactive, press PRO- GRESSIVE in the stop mode. The PROGRESSIVE indicator ÒÓ on the display window will go off.
Warning:
Once ÒProgressiveÓ is selected when connecting to a TV progres- sive scan incompatible, no image will be seen on the video dis- play.
In this case, you must reset the unit by pressing STOP on the front panel for five seconds. The video output will be restored to ÒInter- laceÓ setting, and a picture will once again be seen on a conven- tional analog display.
Different scanning modes
Interlaced scan
Technology that alternately displays
Progressive scan
Technology that simultaneously displays
NOTES:
¥Some discs may not be played back with the progressive scan mode correctly because of the disc characteris- tics or recording condition.
¥There are some progressive TV and
¥You cannot activate the progressive scan mode in the following cases:
- | The unit is in the VCR mode. |
|
- | A DVD disc is currently playing. You must stop playback first. | 45 |
|
| |
|
| En |
2H30301B_En_44_45 | 45 | 8/4/05, 19:23 |