Sylvania 6727DG owner manual Auto REWIND-EJECT, To Cancel the Auto Return Mode

VCR SECTION

RECORDING

AUTO RETURN

VCR

This function allows you to automatically search the beginning of the recorded program(s) after timer recording finishes.

1Press [SET-UP].

Use [K / L] to point to "USER’S SET UP", then press [ENTER].

2 Use [K / L] to point to	– USER'S SET UP –
"AUTO RETURN", then press	RENTAL	[OFF]
	REPEAT PLAY	[OFF]

B AUTO RETURN [ON]

[ENTER] to select "ON".

3When all the timer recordings are completed, the unit will rewind to the beginning of the recorded program(s) and then turn itself off.

NOTE:

•If you turn off the unit while rewinding the tape, the AUTO RETURN will stop.

TO CANCEL THE AUTO RETURN MODE

Repeat steps 1 to 2 and press [ENTER] to select "OFF".

•Even if any power failure occurs, the unit will retain its memory for this feature.

AUTO REWIND-EJECT

VCR

• When the end of a tape is reached during record-

ing, playback, or fast forward, the tape will auto-

matically rewind to the beginning. After rewinding

COPYING A VIDEO CASSETTE (from another source)

VCR

You can make copies of video tapes for your enjoyment.

You CANNOT copy a DVD to a videotape.

WARNING: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

Connect this unit and a source (for playing) device as shown the following diagram.

REC/OTR	REW	PLAY	F.FWD STOP/EJECT	HEADPHONE VIDEO		AUDIO
[This unit]					L	R
		Audio/Video				[Ex: Jacks of
						source device]
		cables
						AUDIO
		(not supplied)
							L
						OUT	IN
							R
						VIDEO
						OUT	IN

1 Insert a pre-recorded video cassette into the source device (VCR, camcorder, etc.).

2 Insert a video cassette to record into this unit’s cassette compartment.

3 Press [SPEED] to select the

finishes, the unit will eject the tape and turn itself

off.

desired recording speed (SP/SLP).

SP

• This function is operative when REPEAT PLAY is

set to "OFF".

• The tape will not auto-rewind during timer record-

ing or One Touch Recording (OTR).

4 Press [SELECT] until "AUX"	AUX
appears on the screen.

5Press [REC/OTR] on the unit.

6Begin playback of the tape

in the source device.

NOTE:

•For best results during copying, use the control panel whenever possible. The remote control might affect the operation of the source device.

7 To stop copying, press [STOP/EJECT CA] on the unit, then stop the playback on the source device.

30

EN