Sylvania A01PDUH Pressing CH − reverses the direction of the input modes, Wide, Normal, Zoom

English

Switching Each Input Mode can easily switch with the remote control between TV (ATSC or NTSC) and external devices when they are connected to the unit.

Press SOURCE or CH + repeatedly to cycle through the input modes.

e.g.)

11.1	Video1	Video2	Component	HDMI1	HDMI2	HDMI3
DTV /TV channel				(or PC input)

•Pressing CH − reverses the direction of the input modes.

TV Screen Display Mode

5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal.

Press FORMAT repeatedly to switch the TV aspect ratio.

For 16:9 video signal

Normal

displays a 16:9 picture at its original size.

4:3

displays a 16:9 picture at a 4:3 size; the picture

is shortened horizontally. Sidebars appear on both

edges of the screen.

Movie Expand

dis

plays a 16:9 picture that is

vertically stretched to fill the screen.This only crops

Normal

4:3

Movie Expand

out the top of the picture.

Zoom

displays a 16:9 picture at its maximum size

without changing its horizontal and vertical ratio.

Wide

displays a horizontally stretched picture. This

crops out the left and right sides of the picture.

Wide

Zoom

For 4:3 video signal

Normal

displays a 4:3 picture at its original size.

Sidebars appear on both edges of the screen.

16:9

displays a 4:3 picture at a 16:9 size; the picture is

stretched horizontally to fill the screen.

Movie Expand

displays a 4:3 picture at a 16:9 size;

the picture is stretched more vertically at the top of

the screen. This crops out the top of the picture.

Normal

16:9

Movie Expand

Zoom

displays a 4:3 picture at a 16:9 size; at its

maximum size that is more vertically stretched to fill

the screen.This crops out the top and bottom of the

picture.

Wide

displays the picture with its center at the

Wide

Zoom

original size and the edges stretched horizontally to fill

the screen.

Normal

HDMI1

displays a proportionately stretched picture.

For PC input signal

through

Input mode

Sidebars appear on both edges of the screen.

Full

displays a picture that is stretched out of

proportion horizontally to fill the screen.

Dot By Dot

displays a picture in its original size.

Normal

Full

Dot By Dot

Channel Selection

Select channels by using CH +/− or the Number buttons	11.1
• To select the memorized channels, use CH +/− or the Number buttons

•To select the non-memorized channels, use the Number buttons

To use the Number buttons

-	ATSC				-	NTSC
	When selecting digital channel 11.1					When selecting cable or analog channel 11
		●	before entering	the subchannel number.
	Be sure to press

INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION

PREV CH to return to the previously viewed channel.

Note	•	[No Signal]			will appear on the TV screen after the subchannel broadcast is over.
	•	[A	udio	only program		]	message will appear on the TV screen, when you receive only sound signal.

17

EN