Polycom RSS 2000 manual Pause Recording, Continue Recording

Polycom RSS 2000 User’s Guide

Fast Recording

Setting the property of the endpoint as Fast Recording at the web client will make it unnecessary to select at the menu interface at the time when the endpoint is calling the RSS 2000. Single point recording can then start directly. For information on setting the property of the endpoint as Fast Recording, refer to the relevant content of Web Management.

Pause Recording

In the recording process, it is possible to pause the recording through the endpoint remote control. When watching the cyclic screens, you may return to the menu of the recorded archives by pressing any arrow key. Selecting Pause Recording will stop the recording process. Meanwhile, the option of Pause Recording now changes to Continue Recording and a voice message "Conference recording paused" given by the system will be heard, as shown in Figure 2-5. At this time, the streams sent to the RSS 2000 by the endpoint will no longer be saved.

Figure 2-5 Pause Recording

Continue Recording

Selecting Continue Recording through the endpoint remote control can resume the paused recording. At this time, you will hear a voice message "Conference recording continues" and see the option changed to Pause Recording again, as shown in Figure 2-6. In this case, when you play the generated archive after the recording is completed, you will find that the part of archive played after the pause and before the resumption has not been recorded.

13