Polycom RSS 2000 manual Physical Memory1039836 KB

Polycom RSS 2000 User’s Guide

CAUTION:	1.	The default login password set at the time of shipment is 'polycom'.
	2.	If you forget your login password, you may first connect the endpoint emulation

software with the RSS 2000, and then reset the RSS 2000 equipment. Once you see "....." on the monitor of the endpoint simulation software, press Ctrl+C and login on

to the equipment (no password needed). At this time, relevant command of changing the login password my help you reset your password.

If you enter a wrong password, the system may require you to login again.

If you enter the right password, you will enter the operational interface of the software:

************************************************************

**		**
**	Welcome to Polycom RSS 2000 Server	**
**		**
**	Polycom RSS 2000 System Information	**
**		**
**	Polycom RSS 2000 Version 1.0.0.006 Build:Jun 19 2006	**
**		**
**		**
**		**

************************************************************

---------------------------------------------------------------

Physical Memory:1039836 KB Intel(R) Pentium(R) 4 CPU 2.80GHz

LAN1: IP: 172.21.99.43 MASK: 255.255.224.0

GW: 172.21.99.1 MAC: 00:90:FB:06:A0:80

RSS 2000 Service is RUNNING

#

Type ? or Help, to get the help information offered by the system.

6