Polycom RSS 2000 User’s Guide
Figure 4-47 Setting Recording rights
Only the endpoint possessing recording rights can enable recording when recording resources are available. Otherwise, recording must not be initiated even if recording resources are idle. If any endpoint without recording rights attempts to initiate recording, the menu of the interface at the endpoint will not display Start Recording.
Allow all endpoints to record: after setting such a right, all endpoints connected to the RSS 2000 can start recording when recording resources are available.
Allow only the endpoints in the user group lists to record: after setting such a right, only the endpoints in selected user groups can initiate recording. This is done by selecting from existing user groups and adding them to the list that allows recording, as shown in Figure
Figure 4-48 Selecting User Groups
60