JVC HR-J4006UM manual Access Tuner SET, Return to Normal Screen, Set Receivable Channels

PRESS (MENU) TO END

10ENINITIALSETTINGS(cont.)

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

Set Receivable Channels

TURN ON THE VCR

1 Press POWER.

ACCESS MAIN MENU

POWER MENU

1

OK

POWER

	SCREEN
2 Press MENU.
	ACCESS TUNER SET
	SCREEN
Move the highlight bar		MAIN MENU
	(arrow) to "TUNER SET" by
3 pressing CH5° or PUSH		FUNCTION SET
		=TUNER SET
	JOG%Þ, then press OK or	INITIAL SET
	PUSH JOG%.
		PRESS (5,°), THEN (OK)
		PRESS (MENU) TO END
	PERFORM AUTO CHANNEL
	SET

1 2 3

4 5 6 2

7 8 9

0 4

CH

•• ••

MENU

3 PUSH JOG

OK

Move the highlight bar		TUNER SET
	(arrow) to "AUTO
4 CHANNEL SET" by		BAND	CATV
		=AUTO CHANNEL SET
	pressing CH5° or PUSH
		MANUAL CHANNEL SET
	JOG%Þ, then press OK or
	PUSH JOG%.
	● Receivable channels in	SELECT WITH (5,°) AND (OK)
	your area are	PRESS (MENU) TO END
	automatically assigned to
	the CH 5° buttons, and	AUTO CHANNEL SET
	non-receivable channels
	are skipped.	SCANNING...

NOTES:

●At the end of Auto

Channel Set, "SCAN COMPLETED" appears on screen.

●If the scan was unsuccessful, "SCAN COMPLETED– NO SIGNAL" appears on screen. Check the connections and start again.

RETURN TO NORMAL

SCREEN

5 Press MENU.

INFORMATION

The VCR detects the band (TV or CATV) and selects the correct band automatically during Auto Channel Set. The selected band will be displayed on the right side of "BAND" on the Tuner Set screen.