JVC HR-J4006UM manual Recording, Playback, During B.E.S.T, S.T. Complete

4 5

7 8

0

PLAY

••

REC

3

PLAY

REC PAUSE

62

9

4

••

PAUSE

EN21

Recording

Perform steps 1 – 3 on page 13 ("Simple Recording") before continuing.

START RECORDING
Press and hold REC and	DURING B.E.S.T.
press PLAY on the remote
1 control, or press REC on
the VCR's front panel.

● The VCR takes about 7
seconds to assess the	START			END
quality of the tape in
	+		+	+
use, then recording
	B.E.S.T. PICTURE SYSTEM
begins with the picture
level optimized.
NOTES:		B.E.S.T. COMPLETE

●B.E.S.T. occurs immedi- ately prior to both the first SP and the first EP recording after inserting the cassette. It does not

take place during	START			END
recording.		+	+		+
● In the case of timer	B.E.S.T. PICTURE SYSTEM
recording, B.E.S.T. takes

place for both SP and EP before the first timer recording after inserting the cassette (regardless of the tape speed selected for that recording).

●Once the cassette is ejected, the B.E.S.T. data is canceled. The next time the cassette is used for recording, B.E.S.T. is re-performed.

●While B.E.S.T. is operative, the PAUSE button will not function.

●To display the B.E.S.T. Picture System, "SUPERIM- POSE" must be set to "ON" or the B.E.S.T. Picture System screen will not appear (☞ pg. 18).

Playback

The VCR assesses the quality of the tape once you start playback.

Perform steps 1 and 2 on page 12 ("Simple Playback") before continuing.

1		START PLAYBACK
	Press PLAY.
		● The VCR adjusts the
		playback picture quality
		based on the quality of	B.E.S.T. PICTURE SYSTEM
		the tape in use.

NOTES:

●When using rental tapes,

or tapes recorded on other VCRs, set "B.E.S.T." in step 4 of the Preparation procedure to either "ON" or "OFF" as desired to give the best picture (☞ pg. 20).

●The B.E.S.T. Picture System screen only appears at the beginning of automatic tracking. Even though the screen doesn't appear after that, the B.E.S.T. function is operative.

●To display the B.E.S.T. Picture System screen, "SUPERIMPOSE" must be set to "ON" or the B.E.S.T. Picture System screen will not appear (☞ pg. 18).

ATTENTION

■As B.E.S.T. takes place before recording actually starts, there is a delay of about 7 seconds after REC and PLAY on the remote, or REC on the VCR's front panel, are pressed. To make sure you record the desired scene or program completely, first perform the following steps:

1)Press and hold PAUSE, and press REC to engage the RECORD/PAUSE mode.

●The VCR then automatically checks the condition of the tape and, after about 7 seconds, re-enters RECORD PAUSE.

2)Press PLAY to start recording.

■If you want to bypass B.E.S.T. and start recording right away, set "B.E.S.T." to "OFF" in step 4 of the Preparation procedure (☞ pg. 20).