JVC HR-J4006UM manual Simple Recording

Simple

Recording

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

PLAY

CH

REC STOP/EJECT PAUSE

1

EN13

		LOAD A CASSETTE
	Make sure the record safety tab is intact. If not, cover the
1 hole with adhesive tape before inserting the cassette.
		SELECT RECORDING
		CHANNEL
	Press CH5°. Or press the appropriate NUMBER keys,
		then press ENTER. (The channel changes after a few
2 seconds whether you press ENTER or not.)
		● If you use the RF connection, by pressing the TV/VCR
		button, select VCR mode to view the program to be
		recorded.
		SET TAPE SPEED
3 Press SP/EP to set the recording speed.
4		START RECORDING
	Press and hold REC and press PLAY on the remote
		control, or press REC on the VCR's front panel.
		B.E.S.T. takes place at the beginning of both the first
		SP and the first EP recording after inserting the
		cassette (when B.E.S.T. is set to "ON", ☞ pg. 20).
		PAUSE/RESUME
		RECORDING
	Press PAUSE. Press PLAY to resume recording.

V/VCR	1	2	3
	4	5	6
	7	8	9
SP/EP		0	4
ENTER
••			••
PLAY
REC
3		STOP

2

NUMBER

CH

PAUSE

5		● During record pause, you can change the recording
		channel by using the CH5° buttons or NUMBER
		keys.
		B.E.S.T. will not take place if the tape speed is
		changed while in record pause mode.
		STOP RECORDING
	Press STOP or STOP/EJECT. Then press STOP/EJECT to
6 remove the cassette.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the VCR.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab