JVC HR-J4006UM manual Mode, Superimpose

18EN

PLAYBACKANDRECORDINGFEATURES(cont.)

MENU

OK

Superimpose

This function, switchable between ON and OFF, determines whether or not operational indicators will appear on screen.

ACCESS MAIN MENU

SCREEN

1 Press MENU.

ACCESS FUNCTION SET

SCREEN

Move the highlight bar (arrow) to "FUNCTION SET" by

2 pressing CH5° or PUSH JOG%Þ, then press OK or

1

1 2

4 5

7 8

0

OSD

••

MENU

3

OK

3

62

9

4

CH

••

PUSH JOG

	PUSH JOG%.
	SELECT SUPERIMPOSE SET
	MODE
Move the highlight bar			FUNCTION
	(arrow) to "SUPERIMPOSE"		B.E.S.T.	ON
3 by pressing CH5° or			PICTURE CONTROL	AUTO
			AUTO TIMER	OFF
	PUSH JOG%Þ, then press
		=SUPERIMPOSE		ON
	OK or PUSH JOG%to		AUTO SP=EP TIMER	OFF
	select the desired mode:		VIDEO STABILIZER	ON
	a– Select "ON" if you want
			SELECT WITH (5,°) AND (OK)
	the superimposed		PRESS (MENU) TO END
	operational indications
	on the TV screen.
	b– Select "OFF" if you do not want the superimposed
	operational indications on the screen.
	RETURN TO NORMAL
	SCREEN
4 Press MENU.

To recall an indication

1Press OSD.

■All indications corresponding to the current status are displayed for 5 seconds. After that, the counter information and RECORD/PAUSE if in the Record Pause mode, are left displayed on the screen.

2Press OSD again to clear the display.

■The RECORD/PAUSE indication is left displayed on the screen.

NOTES:

●If you engage the Record Pause mode, RECORD/PAUSE is displayed regardless of the Superimpose mode setting.

●If you select a channel on which no signal is received, the channel number is displayed regardless of the Superimpose mode setting.

●Each time you press OSD, the indication on the front display panel will also change as follows: counter reading = channel number = clock time. (Channel number is not displayed

during playback.)

The superimposed indication on the TV screen tells you what the VCR is doing.

Tuned-in channel or AUX(iliary) mode
When the channel is changed, the new
channel is displayed on the screen for 5	CH	125		RECORD
seconds.	THU 12:00 AM				PAUSE
				] SP
Clock time	B	+	+	+		E
Tape position indicator				INDEX-1
			COUNT	–1:23:45

Counter reading

Operation mode

When the operation mode is changed, the new mode is displayed — RECORD (5 sec.), PLAY (5 sec.), FF/REW (5 sec. when engaged from Stop mode), RECORD/PAUSE (for as long as Pause is engaged), and ITR *:** (5 sec.).

Tape speed indication

"Cassette Loaded" mark

When a cassette is loaded, the mark is displayed for 5 seconds. It blinks when the VCR's EJECT button is pushed.

INDEX indication