JVC HR-J4006UM manual Recording Features, Engage TV Mode, Select Channel for Viewing

Recording Features

1

1 2 3

4 5 6 2

TV/VCR

7 8 9

0 4

C.RESET

•• ••

3

EN19

Record One Program While

Watching Another

1	ENGAGE TV MODE
	During recording...
	● Press TV/VCR. The VCR's VCR indicator goes out. (If
	you are using the RF connection (☞ pg. 4) to view
	the output from your VCR, the TV broadcast being
	recorded disappears.)
	● If you are using the AV connection (☞ pg. 4) to view
	the output from your VCR, change the TV's input
	mode from AV to TV.

SELECT CHANNEL FOR

VIEWING

2 Use the TV’s channel selector to set the channel you want to watch.

Display Elapsed Recording

Time

1		RESET COUNTER TO ZERO
	Before recording starts, press C.RESET. The counter
		resets to zero and displays the exact elapsed time as the
		tape runs.
		DISPLAY ELAPSED TIME ON
2		SCREEN
	During recording, press OSD at any time to see the
		elapsed time.
		All indications corresponding to the current status of the
		VCR are displayed for 5 seconds. The counter display
		remains on the screen indicating the elapsed time.
		Press OSD again to remove the display.
		● Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 18).
		● The indications are not recorded.
		● Each time you press OSD, the indication on the front
		display panel will also change as follows: counter
		reading = channel number = clock time. (Channel
		number is not displayed during playback.)