JVC HR-J4006UM manual Activate HIGH-SPEED Search, Start Search, Access Distant Code

FF

LAY

REW

CH

1

1	2	3
4	5	6	2
7	8	9
	0	4

LAY		CH
••	••	FF

REW

3 PUSH JOG

High-Speed Search

ACTIVATE HIGH-SPEED

SEARCH

1 During playback or still, press FF for forward high- speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, during playback or still, press and hold FF or REW. When released, normal playback resumes.

EN15

Index Search

Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.

1		START SEARCH
	While the tape is stopped, press PUSH JOGÞor%
		(ª or £).
2		ACCESS DISTANT CODE
	To access a recording 2–9 index codes away, press
		PUSH JOGÞor%(ª or £) repeatedly until the
		correct number is displayed on screen (only if "SUPER-
		IMPOSE" is set to "ON" ☞ pg. 18). Playback begins
		automatically when the desired recording is located.
		● If necessary press REW or FF when play starts to
		search visually to find the very beginning of the
		desired program.

NOTE:

An index code is not placed on the tape when recording is paused and then resumed.

Manual Tracking

Once playback begins, the VCR’s automatic tracking function is engaged. If tracking noise appears in the picture, you can override this and make the adjustment manually.

ENGAGE MANUAL

TRACKING MODE

1 During playback, press the CH5 and ° buttons on the VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.

ADJUST MANUAL

TRACKING

2 Press CH 5or ° on the VCR's front panel or remote. Press briefly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.

RE-ENGAGE AUTOMATIC

TRACKING

3 Press the CH5 and ° buttons on the VCR's front panel simultaneously.

●When automatic tracking is re-engaged, B.E.S.T. is automatically activated.

NOTES:

●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.

●Manual tracking is possible during hands-free slow-motion. During hands-free slow-motion playback, simply press CH 5 or ° on the VCR's front panel or remote to adjust tracking.