JVC HR-J4006UM manual Access Main Menu Screen, Access Function SET, SET Mode, Picture Control

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Move the highlight bar (arrow) to "FUNCTION SET" by
	pressing CH5° or PUSH JOG %Þ, then press OK or
	PUSH JOG%.
	SELECT PICTURE CONTROL
	SET MODE	FUNCTION
	Move the highlight bar	B.E.S.T.	ON
		=PICTURE CONTROL	AUTO
	(arrow) to "PICTURE	AUTO TIMER	OFF
3 CONTROL" by pressing		SUPERIMPOSE	ON
		AUTO SP=EP TIMER	OFF
	CH 5° or PUSH JOG	VIDEO STABILIZER	ON
	%Þ, then press OK or
	PUSH JOG%to select the	SELECT WITH (5,°) AND (OK)
	desired mode.	PRESS (MENU) TO END
	AUTO*: Normally select
	"AUTO".
	It automatically adjusts the picture quality.

*When "B.E.S.T." is set to "OFF" (☞ pg. 20), you can only select "NORM" instead of "AUTO".

EDIT: Select when you dub tapes.

SOFT: Select when you want to soften the picture.

SHARP: Select when you want to sharpen the picture.

NOTES:

•When you select "EDIT", "SHARP" or "SOFT", the selected mode will not change until you select again.

•When you select "EDIT" to dub tapes, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTE:

Select "EDIT" when you are dubbing tapes. Refer to page 29.

EN17

Video Stabilizer

By activating the Video Stabilizer you can correct vertical vibrations in the picture when playing back unstable recordings that were made on another VCR. When this function is set to "ON", vertical vibration will be automatically corrected. *The default setting is "OFF".

		ACCESS MAIN MENU
1		SCREEN
	Press MENU.
		ACCESS FUNCTION SET
2		SCREEN
	Move the highlight bar		MAIN MENU
		(arrow) to "FUNCTION
		SET" by pressing CH5° or	=FUNCTION SET
			TUNER SET
		PUSH JOG%Þ, then press	INITIAL SET
		OK or PUSH JOG%.
			PRESS (5,°), THEN (OK)
			PRESS (MENU) TO END
3		ACTIVATE VIDEO STABILIZER
	Move the highlight bar
		(arrow) to "VIDEO	FUNCTION	ON
		STABILIZER" by pressing	B.E.S.T.
			PICTURE CONTROL	AUTO
		CH5° or PUSH JOG%Þ,	AUTO TIMER	OFF
		then press OK or PUSH	SUPERIMPOSE	ON
		JOG%to set to "ON".	AUTO SP=EP TIMER	OFF
			=VIDEO STABILIZER	ON
			SELECT WITH (5,°) AND (OK)
			PRESS (MENU) TO END
		RETURN TO NORMAL
4		SCREEN
	Press MENU.

NOTES:

●When you finish viewing the tape, be sure to set it back to "OFF".

●Regardless of the setting, this function has no effect during recording and during special-effects playback.

●The Superimpose mode indications may jitter vertically when "VIDEO STABILIZER" is set to "ON".

●To watch recordings with close-caption, it is necessary to set

the Video Stabilizer function to "OFF".