JVC HR-J4006UM manual Edit To Another VCR

EDITING

EN27

Edit To Another VCR

Player Your VCR

AUDIO OUT

VIDEO OUT

Audio/Video Cable (not supplied)

VIDEO IN AUDIO IN

Recorder Another VCR

PLAY

You can use your VCR as the player and another VCR as the recorder.

1		MAKE CONNECTIONS
	Connect an AV cable between your VCR's VIDEO OUT
		and AUDIO OUT connectors and another VCR’s
		VIDEO IN and AUDIO IN connectors.
		● When connecting to a Hi-Fi VCR, connect your
		VCR's AUDIO OUT connector to the AUDIO IN L
		connector on the Hi-Fi VCR.
2		LOAD CASSETTES
	Insert the playback cassette into your VCR and the
		cassette to be recorded on into the other VCR.
		SET RECORDER’S INPUT
3		MODE
	Set the other VCR's auxiliary (AV) input mode.
		SELECT "EDIT" FOR PIC-
4		TURE CONTROL SET MODE
	Follow the "Picture Control" section on page 17, then
		select "EDIT".
	NOTE:
		When you select "EDIT" to dub tapes, be sure to select
		"AUTO" or ("NORM" when "B.E.S.T." is set to "OFF")
		after you finish dubbing the tapes.
5		START PLAYER
	Press PLAY on your VCR.
	NOTE:
		If you don't want to record the superimposed indication
		on the edited tape, be sure to set "SUPERIMPOSE" to
		"OFF" before pressing PLAY (☞ pg. 18).
6		START RECORDER
	Set the other VCR to its record mode.