JVC HR-J4006UM manual Start Repeat, Stop Repeat, Layback and Recording Features

16EN

PLAYBACKANDRECORDINGFEATURES(cont.)

POWER MENU

	PLAY	FF
REW
CH	OK	STOP	PAUSE

Repeat Playback

START REPEAT

1 Press and hold PLAY (until " " blinks on the front display panel) during playback, then release.

SP

VCR

		● The entire tape is played back 50 times.
2		STOP REPEAT
	To stop, press STOP at any time.
		NOTE:

Pressing PLAY, REW, FF, PAUSE or PUSH JOG ªor

£also stops Repeat Playback.

1

1 2 3

DISPLAY	4	5	6
	7	8	9
		0	4
C.RESET
			PLAY

2

Counter Reset

POWER
	1		RESET COUNTER TO ZERO
		Press C.RESET.
			NOTE:
		By pressing the DISPLAY button, you can change the
TIMER		display to show the counter reading, channel number
		or clock time. (Channel number is not displayed during
		playback.) If "SUPERIMPOSE" is set to "ON", the
CH		superimposed indication will appear on the TV screen
		(☞ pg. 18).

••

REW

MENU

3

OK

••

STOP

FF

PAUSE

PUSH JOG

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF or REW,
or perform an Index Search. The
position of "	" in relation to "B"
(Beginning) or "E" (End) shows you		B	+	+	+		E
where you are on the tape.
NOTES:				COUNT		0:33:27

●"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 18).

●It may take a few seconds for the Tape Position Indicator to be displayed.

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer functions if the cassette's record safety tab is removed.