JVC HR-S8600EK REC Link indicator, Before performing the following steps, Automatically

Page 31

31

8

SP/LP

 

LINK

REC LINK indicator

REC

 

 

 

 

ATTENTION

●Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the recorder will start recording when the satellite receiver's power is turned on.

●If you have connected another appliance other than a satellite receiver to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

●When you press and hold the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the REC LINK indicator does not light but instead blinks quickly even though your satellite receiver's power is off, Auto Satellite Prog Recording will not work properly with that satellite receiver*.

If this is the case, perform "Express Timer Programming" (☞ pg. 18) to timer-record a satellite programme.

*Some satellite receivers output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite receivers.

Before performing the following steps:

●Make sure the satellite receiver is connected to the recorder's AV2 IN/DECODER connector. (☞ pg. 30)

●Programme the timer on the satellite receiver.

●Insert a cassette with the safety tab in place.

ACCESS MAIN MENU SCREEN

1 Press MENU.

 

 

 

 

 

 

ACCESS MODE SET SCREEN

 

 

 

Move the highlight bar (pointer) to "MODE SET" by

2 pressing %Þ, then press OK or%.

 

 

3

SELECT AV2 SELECT MODE

 

 

Move the highlight bar (pointer) to "AV2 SELECT", by

pressing %Þ, then press OK or%to set to "SAT".

 

MODE SET

 

 

PREVIOUS PAGE

 

 

 

 

 

 

 

 

 

 

 

B. E. S. T.

ON

 

POWER SAVE

OFF

 

 

PICTURE CONTROL

AUTO

 

S-VHS

AUTO

 

 

AUTO TIMER

OFF

AV1 SELECT

VIDEO

 

 

O. S. D.

ON

AV2 SELECT

SAT

 

 

 

DIRECT REC

ON

TIME SCAN AUDIO

ON

 

 

 

AUTO SP=LP TIMER

OFF

 

 

 

 

 

DIGITAL 3R

ON

 

 

 

 

 

NEXT PAGE

 

 

 

 

 

 

[5°] =

 

 

[5°] =

 

 

 

 

[MENU] : EXIT

 

 

[MENU] : EXIT

 

 

 

 

 

 

 

 

 

 

SET TAPE SPEED

 

 

 

4 Press SP/LP ( ) to set the tape speed.

 

 

 

ENGAGE AUTO SATELLITE PROG

 

REC MODE

 

 

 

 

 

 

Press and hold REC LINK for about 2 seconds. The REC

 

LINK indicator lights up and the recorder turns off

5 automatically.

 

 

 

 

 

●To disengage the Auto Satellite Prog Rec mode, press REC LINK. The REC LINK indicator goes off.

●If the recorder's power is off, it is not possible to engage the Auto Satellite Prog Rec mode.

NOTES:

●Auto Satellite Prog recording is possible with the AV2 IN/DECODER connector only.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●After Auto Satellite Prog recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (☞ pg. 25).

●For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

●Auto Satellite Prog recording is not possible if your satellite receiver does not have a timer.

●The REC LINK indicator blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengages the Auto Satellite Prog Rec mode.

●If there is more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set a different tape speed for each; the tape speed selected in step 4 will apply to all the programmes for Auto Satellite Prog recording.

●The B.E.S.T. system (☞ pg. 22) does not work while Auto Satellite Prog recording is in progress.

●Just Clock (☞ pg. 61) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite receiver, the recorder may not record a short portion at the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Auto Satellite Prog Rec mode when the satellite receiver's power is on, the recorder will not start Auto Satellite Prog recording even though the REC LINK indicator blinks. When the satellite receiver shuts off once and is turned back on again, the recorder starts recording.

●You can also record a programme from your cable system in the same way if the system has a timer and is connected to the recorder's AV2 IN/DECODER connector.

Page 30 Page 32
Image 31
Page 30 Page 32
Contents HR-S8600EK Connection to the mains supply in the United Kingdom Safety PrecautionsDo not place the recorder Moisture CondensationSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of Recorder Back of TVMains outlet Mains Power Cord Back of TV Audio in connectorsGo to item Before performing the following procedure, make sure thatLink screen will appear. Then the Guide Remote control while downloading isShows either the display as illustrated on 10 or If -- appears on the display panel, referIf both auto channel set and auto clock set have failed If auto channel set has succeeded but auto clock set has notNexTView Link TV Auto Power OnLink Functions Turn on the RecorderStart Playback PlaybackLoad a Cassette PointSlow Motion PlaybackActivate HIGH-SPEED Search Still Picture/Frame-By-Frame PlaybackRecording SET Counter Display Select Preset to WatchReset Counter Engage ITR ModeEnter Pluscode Number Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Access Video PLUS+ Program ScreenPDC Recording Timer WarningTime Express Timer ProgrammingBefore performing Express Timer Programming Enter Programme Start TimeScreen SET PDC ModeTimer Mode Return to NormalCheck, Cancel And Replace Programmes VHS Super VHS and VHS Recording According To Tape TypeS.T. Picture System Playback/ Recording According To Tape Charac- teristicsDuring B.E.S.T RecordingPlayback Or press Record on the recorderDigital 3R Playback Picture AdjustmentManual Tracking Digital TBC/NRSections Looking For Scene You WantActivate Index Search Skip Over UnwantedNormal recorder Audio signal during TimeScanTimeScan Variable-Speed Search/ Reverse PlayForward Search Play Slow-Motion Still TimeScanTimeScan Audio Speed SP Speed LP Audio output Return to Normal Screen Access Main Menu Selecting Sound You Want Control ScreenType of Broadcast On-screen Display Being Received Receiving Nicam Stereo And Bilingual ProgrammesSoundtrack Selection During PlaybackSatellite Receiver Unit ConnectorTV Aerial cable Connector Audio in connectors Automatic Satellite Programme RecordingBefore performing the following steps REC Link indicatorMove the highlight bar pointer to Mode SET by Link indicator lights up and the recorder turns offRemote Con- trol Functions SET Remote ControlRE-SUPPLY Power Remote A/B Code SwitchingOperate TV TV Multi-brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeSatellite Tuner Brand Code Satellite Receiver Multi- Brand Remote ControlOperate Satellite Receiver TV Prog +/-,NUMBER keysMinimizing Picture Degradation While Editing Access Main Menu ScreenAccess Mode SET Screen Select Picture Control SET ModeEdit From Camcorder Synchro Editing Connector Lanc Cable not provided To Lanc connectorRepeat steps 4 6 as necessary Edit To Or From Another Video Recorder TV Receiver Player Your recorder Recorder AV2 Select Setting AV1 Select SettingStart Dubbing SET Input ModeLocate Start Point Engage Audio DubbingPrepare for Editing Random As- semble EditingEND R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditInsert Editing Reset the CounterLocate END Point Start Editing Engage Insert EditingEND Insert Editing Information On J Terminal Terminal JLIPJoint Level Interface Protocol ConnectorAccess Initial SET Screen Access Jlip ID NO. SET ScreenON-SCREEN Display Access Mode SETENABLE/DISABLE Other FunctionsMode Power Save ModeAuto Timer Auto SP→LP TimerNext Function Memory Retake Engage RECORD-PAUSE ModeResume Recording Repeat PlaybackAudio Cable not provided Speaker Connection To Stereo SystemSET Video Channel Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetWith RF Connection Test SignalPerform Auto Channel SET Tuner SetAuto Channel Set For about 5 seconds, a Screen preset positionsAfter Scan Completed Is displayed on the screenClose Confirmation Screen Storing Channels ManuallyInput Channel Enter NEW Channel InformationFine-Tuning Channels Already Stored Change Station Preset PositionDelete a Channel Select NEW Station Access ManualSwitch Stations Channel SET ScreenStation Name TV Station And ID ListTV Station Channel Number Guide Just Clock Clock SetNumber Video Plus+ SetupGuide Program Number Set Ä remain lit on the display panel. Is there Problem? Questions And AnswersTroubleshooting Won’t stop Timer RecordingFront View Index@ # $ % Rear ViewRemote Control How To Use Remote Control LCDEMO Memo DA4 Double Azimuth helical Maximum recording timeVHF 44.5 143/143 470 MHz
Top Page Image Contents