JVC HR-S8600EK setup guide Insert Editing, Locate END Point, Reset the Counter

44ADVANCEDOPERATIONS(cont.)

Insert Editing

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Recorder

TV

PROG

Your recorder JOG

8

PAUSE	SHUTTLE
	TIME SCAN

Source tape

	Before insert editing	Normal audio
Recorded tape		track
	After insert editing
		Video/Hi-Fi
		audio track

S-Video signal Audio/Video signal

Another recorder

Player

	MAKE CONNECTIONS
	Connect the player's VIDEO OUT or S-VIDEO OUT
	and AUDIO OUT connectors to your recorder's VIDEO
1 or S-VIDEO and AUDIO input connectors on the front
	panel.
2	SET INPUT MODE
	Press NUMBER key "0" and/or TV PROG so that "F-1"
	for the VIDEO/AUDIO input connectors or "S-1" for
	S-VIDEO/AUDIO input connectors appears in place of
	a channel number.
	LOCATE END POINT
	Load the recording cassette into your recorder, and play
	it back to determine the edit-out point (the end of the
3 segment to be replaced) using the TIME SCAN SHUTTLE

1
2
1	2
NUMBER	5
4
"0"	8
7
0000	0
1
2

– –:– –

3

6

9

3

4

4

3

TV PROG

ring or the JOG dial or pressing @#and PAUSE.

RESET THE COUNTER

4 Press 0000 to change the counter display to "0:00:00".

LOCATE START POINT

Determine the edit-in point (the beginning of the

segment to be replaced) using the TIME SCAN SHUTTLE

5 ring or the JOG dial or pressing @#and PAUSE.

● Be sure to engage the Still mode at the edit-in point.

PAUSE

￿