JVC HR-S8600EK Information On J Terminal, Terminal JLIPJoint Level Interface Protocol Connector

46ADVANCEDOPERATIONS(cont.)

Information On J Terminal

J terminal

J Terminal (JLIP(Joint Level Interface Protocol) Connector)

The J Terminal is used to connect the recorder to a personal computer or similar device to allow computerized control of the recorder during editing and certain other operations.

Examples:

With the optional JLIP VIDEO CAPTURE BOX GV-CB3E:

●Enables Random Assemble Editing of up to 99 segments, using this recorder as the playback unit.

●Allows you to capture still images from the recorder into a personal computer.

For further details consult your nearest JVC dealer.

JLIP ID Number

Your recorder has its own JLIP ID number. This ID number must be unique when your recorder is connected to another device via its J terminal. The ID Number is preset to "1" at the factory. You can change this number to any number between "1" and "99". If it is necessary to change the JLIP ID number perform the following steps.

1

2

NUMBER

1

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

3

	1
	2
OK	3

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS INITIAL SET SCREEN

Press %Þ to move the highlight bar (pointer) to "INITIAL SET", then press OK or #.

ACCESS JLIP ID NO. SET SCREEN

Press %Þ and move the	INTIAL SET
highlight bar (pointer) to	CLOCK SET
"JLIP ID NO. SET", then
	GUIDE PROG SET

2MENU

press OK or .
	JLIP ID NO. SET
#
	[5°] =
	[MENU] : EXIT

SET JLIP ID NUMBER

￿

4

Press NUMBER keys to enter the desired ID number.

JLIP ID NO. SET

1

CLOCK SET

[0-9] = [MENU] : EXIT

5

RETURN TO NORMAL SCREEN

Press OK.