JVC HR-S8600EK setup guide Video Channel Set, Access Video Channel SET Mode, SET Video Channel

Page 52

52SUBSIDIARYSETTINGS

Video Channel Set

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

STOP

8

IMPORTANT

Perform the following steps only if —

—Video Channel Set has not been done correctly by the Auto Set Up function (☞ pg. 8).

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV or S-VIDEO connection, or vice versa.

●If you have connected the video recorder to your TV via both the provided RF cable and a

21-pin SCART cable (AV connection), or via the provided RF cable, an S-Video cable and an audio cable (S-VIDEO connection), you do not need the video channel so you have to set the video channel to off. — Go to "With AV or S- VIDEO Connection" below.

●If you have connected the video recorder to your TV via the provided RF cable only (RF connection), you have to set the correct video channel — Go to "With RF Connection" on page 53.

1

2

1

2

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

3 OK

TV PROG

With AV or S-VIDEO

Connection

Before performing the following procedure, make sure that:

■the mains power cord is plugged into the mains outlet.

■the video recorder is turned off and there is no cassette inserted in the recorder.

■batteries have been installed in the remote control.

ACCESS VIDEO CHANNEL SET MODE

1	Press and hold down STOP on the recorder until the
	display panel shows the following.


2	SET VIDEO CHANNEL
	Press TV PROG – until the display panel shows
	"–OUT– –".

●Now the video channel is set to off.

EXIT VIDEO CHANNEL SET MODE

3 Press OK.

To view picture signals from the video recorder, set your TV to its AV mode. Refer to the instructions supplied with your TV set for how to do this.

Image 52

Contents HR-S8600EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV Back of RecorderBack of TV Audio in connectors Mains outlet Mains Power CordBefore performing the following procedure, make sure that Go to itemRemote control while downloading is Shows either the display as illustrated on10 or If -- appears on the display panel, refer Link screen will appear. Then the GuideIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkPlayback Load a CassettePoint Start PlaybackPlayback Activate HIGH-SPEED SearchStill Picture/Frame-By-Frame Playback Slow MotionRecording Select Preset to Watch Reset CounterEngage ITR Mode SET Counter DisplayVideo Plus+ Timer Programming Access Video PLUS+ ScreenAccess Video PLUS+ Program Screen Enter Pluscode NumberTimer Warning PDC RecordingExpress Timer Programming Before performing Express Timer ProgrammingEnter Programme Start Time TimeSET PDC Mode Timer ModeReturn to Normal ScreenCheck, Cancel And Replace Programmes Recording According To Tape Type VHS Super VHS and VHSPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemRecording PlaybackOr press Record on the recorder During B.E.S.TPlayback Picture Adjustment Manual TrackingDigital TBC/NR Digital 3RLooking For Scene You Want Activate Index SearchSkip Over Unwanted SectionsAudio signal during TimeScan TimeScanVariable-Speed Search/ Reverse Play Normal recorderTimeScan TimeScan AudioSpeed SP Speed LP Audio output Forward Search Play Slow-Motion StillAccess Main Menu Selecting Sound You WantControl Screen Return to Normal ScreenReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionDuring Playback Type of Broadcast On-screen Display Being ReceivedConnector TV Aerial cable Connector Audio in connectorsAutomatic Satellite Programme Recording Satellite Receiver UnitREC Link indicator Move the highlight bar pointer to Mode SET byLink indicator lights up and the recorder turns off Before performing the following stepsSET Remote Control RE-SUPPLY PowerRemote A/B Code Switching Remote Con- trol FunctionsTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSatellite Receiver Multi- Brand Remote Control Operate Satellite ReceiverTV Prog +/-,NUMBER keys Satellite Tuner Brand CodeAccess Main Menu Screen Access Mode SET ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder Synchro Editing Connector Lanc Cable not provided To Lanc connectorRepeat steps 4 6 as necessary Edit To Or From Another Video Recorder TV Receiver Player Your recorder Recorder AV1 Select Setting AV2 Select SettingSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingRandom As- semble Editing Prepare for EditingLocate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. EditInsert Editing Reset the CounterLocate END Point Start Editing Engage Insert EditingEND Insert Editing Terminal JLIPJoint Level Interface Protocol Connector Access Initial SET ScreenAccess Jlip ID NO. SET Screen Information On J TerminalAccess Mode SET ENABLE/DISABLEOther Functions ON-SCREEN DisplayPower Save Mode ModeAuto Timer Auto SP→LP TimerNext Function Memory Engage RECORD-PAUSE Mode Resume RecordingRepeat Playback RetakeConnection To Stereo System Audio Cable not provided SpeakerAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelTest Signal With RF ConnectionPerform Auto Channel SET Tuner SetAuto Channel Set Screen preset positions After Scan CompletedIs displayed on the screen For about 5 seconds, aStoring Channels Manually Input ChannelEnter NEW Channel Information Close Confirmation ScreenFine-Tuning Channels Already Stored Change Station Preset PositionDelete a Channel Access Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List Station NameTV Station Channel Number Guide Clock Set Just ClockNumber Video Plus+ SetupGuide Program Number Set Questions And Answers Ä remain lit on the display panel. Is there Problem?Troubleshooting Timer Recording Won’t stopIndex Front ViewRear View @ # $ %Remote Control Remote Control LCD How To UseEMO Memo DA4 Double Azimuth helical Maximum recording timeVHF 44.5 143/143 470 MHz