JVC HR-S8600EK Maximum recording time, DA4 Double Azimuth helical, VHF 44.5 143/143 470 MHz

Page 72

SPECIFICATIONS

GENERAL

Power requirement	: AC 220 – 240 V`, 50/60 Hz
Power consumption
Power on	: 24 W
Power off	: 5.5 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)	: 437 x 97 x 347 mm
Weight	: 4.8 kg
Format	: S-VHS/VHS PAL standard
Maximum recording time
(SP)	: 240 min. with E-240 video
	cassette
(LP)	: 480 min. with E-240 video
	cassette
VIDEO/AUDIO
Signal system	: PAL-type colour signal and
	CCIR monochrome signal,
	625 lines/50 fields
Recording system	: DA4 (Double Azimuth) helical
	scan system
Signal-to-noise ratio	: 45 dB
Horizontal resolution	: 250 lines (VHS)
	400 lines (S-VHS)
Frequency range	: 70 Hz to 10,000 Hz (Normal
	audio)
	20 Hz to 20,000 Hz (Hi-Fi
	audio)
Input/Output	: 21-pin SCART connectors
	(IN/OUT x 1,
	IN/DECODER x 1)
	RCA connectors
	(VIDEO IN x 1, AUDIO IN x 1,
	AUDIO OUT x 1)
	S-Video connectors
	(IN x 1, OUT x 1)

TUNER/TIMER

TV channel storage
capacity	: 99 positions
	(+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 44.5 – 143/143 – 470 MHz
	UHF 470 – 862 MHz
Aerial output	: UHF channels 22 – 69
	(Adjustable)
Memory backup time	: Approx. 10 min.
ACCESSORIES
Provided accessories	: RF cable,
	Infrared remote control unit,
	"AA" battery x 2

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

HR-S8600EK

VICTOR COMPANY OF JAPAN, LIMITED

COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.

	Printed in Malaysia
EK	0899NFVIDPJ
	0899NFVIDPJ

Image 72

Contents HR-S8600EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV Back of RecorderBack of TV Audio in connectors Mains outlet Mains Power CordBefore performing the following procedure, make sure that Go to itemRemote control while downloading is Shows either the display as illustrated on10 or If -- appears on the display panel, refer Link screen will appear. Then the GuideIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkPlayback Load a CassettePoint Start PlaybackPlayback Activate HIGH-SPEED SearchStill Picture/Frame-By-Frame Playback Slow MotionRecording Select Preset to Watch Reset CounterEngage ITR Mode SET Counter DisplayVideo Plus+ Timer Programming Access Video PLUS+ ScreenAccess Video PLUS+ Program Screen Enter Pluscode NumberTimer Warning PDC RecordingExpress Timer Programming Before performing Express Timer ProgrammingEnter Programme Start Time TimeSET PDC Mode Timer ModeReturn to Normal ScreenCheck, Cancel And Replace Programmes Recording According To Tape Type VHS Super VHS and VHSPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemRecording PlaybackOr press Record on the recorder During B.E.S.TPlayback Picture Adjustment Manual TrackingDigital TBC/NR Digital 3RLooking For Scene You Want Activate Index SearchSkip Over Unwanted SectionsAudio signal during TimeScan TimeScanVariable-Speed Search/ Reverse Play Normal recorderTimeScan TimeScan AudioSpeed SP Speed LP Audio output Forward Search Play Slow-Motion StillAccess Main Menu Selecting Sound You WantControl Screen Return to Normal ScreenReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionDuring Playback Type of Broadcast On-screen Display Being ReceivedConnector TV Aerial cable Connector Audio in connectorsAutomatic Satellite Programme Recording Satellite Receiver UnitREC Link indicator Move the highlight bar pointer to Mode SET byLink indicator lights up and the recorder turns off Before performing the following stepsSET Remote Control RE-SUPPLY PowerRemote A/B Code Switching Remote Con- trol FunctionsTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSatellite Receiver Multi- Brand Remote Control Operate Satellite ReceiverTV Prog +/-,NUMBER keys Satellite Tuner Brand CodeAccess Main Menu Screen Access Mode SET ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder Connector Lanc Cable not provided To Lanc connector Synchro EditingRepeat steps 4 6 as necessary Edit To Or From Another Video Recorder TV Receiver Player Your recorder Recorder AV1 Select Setting AV2 Select SettingSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingRandom As- semble Editing Prepare for EditingLocate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. EditReset the Counter Insert EditingLocate END Point Engage Insert Editing Start EditingEND Insert Editing Terminal JLIPJoint Level Interface Protocol Connector Access Initial SET ScreenAccess Jlip ID NO. SET Screen Information On J TerminalAccess Mode SET ENABLE/DISABLEOther Functions ON-SCREEN DisplayPower Save Mode ModeAuto SP→LP Timer Auto TimerNext Function Memory Engage RECORD-PAUSE Mode Resume RecordingRepeat Playback RetakeConnection To Stereo System Audio Cable not provided SpeakerAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelTest Signal With RF ConnectionTuner Set Perform Auto Channel SETAuto Channel Set Screen preset positions After Scan CompletedIs displayed on the screen For about 5 seconds, aStoring Channels Manually Input ChannelEnter NEW Channel Information Close Confirmation ScreenChange Station Preset Position Fine-Tuning Channels Already StoredDelete a Channel Access Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List Station NameTV Station Channel Number Guide Clock Set Just ClockVideo Plus+ Setup NumberGuide Program Number Set Questions And Answers Ä remain lit on the display panel. Is there Problem?Troubleshooting Timer Recording Won’t stopIndex Front ViewRear View @ # $ %Remote Control Remote Control LCD How To UseEMO Memo Maximum recording time DA4 Double Azimuth helicalVHF 44.5 143/143 470 MHz