JVC HR-S8600EK setup guide Remote Con- trol Functions, SET Remote Control, Code, RE-SUPPLY Power

Page 32

32ADVANCEDOPERATIONS(cont.)

Remote Con- trol Functions

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

VCR

NUMBER "1"

1

2

1

2

–:–

1 2 3

4 5 6

7 8 9

0

3

4

4

3

 

 

 

1

 

REMOVE POWER SUPPLY

 

 

 

 

Unplug the mains power cord from the mains outlet.

 

 

 

 

 

SET REMOTE CONTROL

 

 

 

2

 

CODE

 

 

 

 

Press and hold VCR on the remote control for over 2

 

 

 

 

seconds, press the NUMBER key "2" and then press OK.

 

 

 

3

 

RE-SUPPLY POWER

OK

 

Plug the mains power cord back into the mains outlet.

4

 

TURN THE RECORDER ON

 

 

 

 

 

 

 

 

Press

 

 

 

on the remote control. The recorder will now

 

 

 

 

only respond to B code signals.

NOTE:

￿

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

Image 32
Contents HR-S8600EK Safety Precautions Connection to the mains supply in the United KingdomMoisture Condensation Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide Back of TV Back of RecorderBack of TV Audio in connectors Mains outlet Mains Power CordBefore performing the following procedure, make sure that Go to itemRemote control while downloading is Shows either the display as illustrated on10 or If -- appears on the display panel, refer Link screen will appear. Then the GuideIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTV Auto Power On Link FunctionsTurn on the Recorder NexTView LinkPlayback Load a CassettePoint Start PlaybackPlayback Activate HIGH-SPEED SearchStill Picture/Frame-By-Frame Playback Slow MotionRecording Select Preset to Watch Reset CounterEngage ITR Mode SET Counter DisplayVideo Plus+ Timer Programming Access Video PLUS+ ScreenAccess Video PLUS+ Program Screen Enter Pluscode NumberTimer Warning PDC RecordingExpress Timer Programming Before performing Express Timer ProgrammingEnter Programme Start Time TimeSET PDC Mode Timer ModeReturn to Normal ScreenCheck, Cancel And Replace Programmes Recording According To Tape Type VHS Super VHS and VHSPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemRecording PlaybackOr press Record on the recorder During B.E.S.TPlayback Picture Adjustment Manual TrackingDigital TBC/NR Digital 3RLooking For Scene You Want Activate Index SearchSkip Over Unwanted SectionsAudio signal during TimeScan TimeScanVariable-Speed Search/ Reverse Play Normal recorderTimeScan TimeScan AudioSpeed SP Speed LP Audio output Forward Search Play Slow-Motion StillAccess Main Menu Selecting Sound You WantControl Screen Return to Normal ScreenReceiving Nicam Stereo And Bilingual Programmes Soundtrack SelectionDuring Playback Type of Broadcast On-screen Display Being ReceivedConnector TV Aerial cable Connector Audio in connectorsAutomatic Satellite Programme Recording Satellite Receiver UnitREC Link indicator Move the highlight bar pointer to Mode SET byLink indicator lights up and the recorder turns off Before performing the following stepsSET Remote Control RE-SUPPLY PowerRemote A/B Code Switching Remote Con- trol FunctionsTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSatellite Receiver Multi- Brand Remote Control Operate Satellite ReceiverTV Prog +/-,NUMBER keys Satellite Tuner Brand CodeAccess Main Menu Screen Access Mode SET ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While EditingEdit From Camcorder Repeat steps 4 6 as necessary Connector Lanc Cable not provided To Lanc connectorSynchro Editing Edit To Or From Another Video Recorder TV Receiver Player Your recorder Recorder AV1 Select Setting AV2 Select SettingSET Input Mode Locate Start PointEngage Audio Dubbing Start DubbingRandom As- semble Editing Prepare for EditingLocate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. EditLocate END Point Reset the CounterInsert Editing END Insert Editing Engage Insert EditingStart Editing Terminal JLIPJoint Level Interface Protocol Connector Access Initial SET ScreenAccess Jlip ID NO. SET Screen Information On J TerminalAccess Mode SET ENABLE/DISABLEOther Functions ON-SCREEN DisplayPower Save Mode ModeNext Function Memory Auto SP→LP TimerAuto Timer Engage RECORD-PAUSE Mode Resume RecordingRepeat Playback RetakeConnection To Stereo System Audio Cable not provided SpeakerAccess Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelTest Signal With RF ConnectionAuto Channel Set Tuner SetPerform Auto Channel SET Screen preset positions After Scan CompletedIs displayed on the screen For about 5 seconds, aStoring Channels Manually Input ChannelEnter NEW Channel Information Close Confirmation ScreenDelete a Channel Change Station Preset PositionFine-Tuning Channels Already Stored Access Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List Station NameTV Station Channel Number Guide Clock Set Just ClockGuide Program Number Set Video Plus+ SetupNumber Questions And Answers Ä remain lit on the display panel. Is there Problem?Troubleshooting Timer Recording Won’t stopIndex Front ViewRear View @ # $ %Remote Control Remote Control LCD How To UseEMO Memo VHF 44.5 143/143 470 MHz Maximum recording timeDA4 Double Azimuth helical