Tascam DV-W11R user manual Front Panel

Page 12

Front Panel

The DVD/CD Duplicator control panel features an LCD display and four buttons. These buttons are described in the following table:

Press the Up arrow button to scroll up functions or menus.

Press the Down arrow button to scroll down functions or menus.

Press the ENT (Enter) button to execute a selected function.

Press the ESC (Escape) button to cancel a selected function or to return to the main menu.

source drive: Insert the disc to be copied into the source drive. Use the disc tray to load a DVD or CD into the drive. You can open the tray by pressing the Load/Eject button (if the tray fails to open, you can use the emergency

eject mechanism). You can close the tray by pressing the Load/Eject button.

Note: It is strongly recommended that you do not push the tray in to close it. Please press the Load/Eject button to eject or retract the tray. See Figure 8 on page 30.

target drive: Insert a blank disc into the target drive to make a copy of the source disc. You can open the tray by pressing the Load/Eject button (if the tray fails to open, you can use the emergency eject mechanism). You can

close the tray by pressing the Load/Eject button.

Note: It is strongly recommended that you do not push the tray in to close it. Please press the Load/Eject button to eject or retract the tray. See Figure 8 on page 30.

4

Rackmount DVD/CD Duplicator User’s Manual

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Copy TestTest & Copy VerifyCompare PrescanDisc Info Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing CD to HDD Play Audio TrackClose Session LanguageDVD Burn Speed Read SpeedAuto Start Drive Startup MenuBurn Mode Eject DiscBurn on the Fly Display TimeAdvanced Setup Adv Setup Read Error Skip Update Firmware12.9 H/W Diagnostic Format HDDLoad Default 12.11 CD+GIsrc & MCN CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support
Top Page Image Contents