Tascam DV-W11R user manual DVD Burn Speed, Read Speed, Auto Start Drive, Startup Menu, Auto Verify

Page 26

11.3 DVD Burn Speed

11.3 DVD Burn Speed

The DVD Burn Speed setting controls the writing speed of the target drive when recording onto DVD±RW media. The default value is MAXIMUM, which writes at the highest speed available on the target drive. On occasion, using the maximum writing speed will cause copy failure due to poor quality DVD±RW discs. In this case, it is recommended that you reduce the writing speed.

11.4 Read Speed

The Read Speed function enables you to set the reading speed of the target drive. MAXIMUM is the default setting.

11.5 Auto Start Drive

The Auto Start Drive setting enables the DVD/CD Duplicator to auto-start the copy or test process as soon as a blank disc is inserted into the target drive. The default setting is OFF.

11.6 Startup Menu

The Startup Menu setting enables you to select a menu item to be displayed as the first menu item when you turn on the DVD/CD Duplicator. COPY is the default.

11.7 Auto Verify

The Auto Verify setting controls auto verification of discs after a copy operation. The default setting is OFF.

11.8 Auto Compare

The Auto Compare setting controls auto-comparison of data between source and target discs after a copy operation. The default setting is OFF.

11.9 Auto Prescan

The Auto Prescan setting controls automatic prescan of the source disc whenever a data/audio disc is inserted in the optical source drive. The default setting is OFF.

18

Rackmount DVD/CD Duplicator User’s Manual

Page 25 Page 27
Image 26
Page 25 Page 27
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Test & Copy CopyTest VerifyDisc Info ComparePrescan Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Close Session CD to HDDPlay Audio Track LanguageAuto Start Drive DVD Burn SpeedRead Speed Startup MenuBurn on the Fly Burn ModeEject Disc Display TimeAdvanced Setup Adv Setup 12.9 H/W Diagnostic Read Error SkipUpdate Firmware Format HDDIsrc & MCN Load Default12.11 CD+G CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support
Top Page Image Contents