Tascam DV-W11R user manual Introduction

Page 9

Chapter 1. Introduction

Thank you for purchasing a TEAC or TASCAM 2U Rackmount DVD/CD Duplicator.

Note: This User's Manual is intended for both TEAC and TASCAM branded Rackmount DVD/CD Duplicators. Operational instructions for both models are essentially the same. The primary differences between the models are the TEAC or TASCAM logo on the LCD control panel and the name plate on the rear panel.

The Rackmount DVD/CD Duplicator is a stand-alone disc-to-disc DVD/CD Duplicator system that does not require connection to a computer. It can duplicate a single master DVD±R to DVD±R media at up to 20X speeds, resulting in an exact replica of a 4.7GB disc. It can duplicate discs to CD-R/CD-RW media at up to 48X/32X speeds respectively. It can also duplicate discs to DVD±R DL media.

The Rackmount DVD/CD Duplicator is designed to perform DVD and CD copying quickly and accurately. The Rackmount DVD/CD Duplicator automatically identifies source DVD formats and replicates the content as required.

The Rackmount DVD/CD Duplicator performs continuous copying with no waiting. It is an ideal DVD/CD Duplicator for the advanced user who requires speed and accuracy.

You can set up your Rackmount DVD/CD Duplicator very quickly and easily. There is no need to install any software. There is no need to attach any cables to your computer. The Rackmount DVD/CD Duplicator functions entirely as a stand-alone unit.

Rackmount DVD/CD Duplicator User’s Manual

1

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Copyright and Trademark Information Safety PrecautionsFCC Radio Frequency Interference Regulations Piracy StatementTable of Contents Appendix A. List of Functions Appendix B. LCD Messages About This Manual List of FiguresRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel of Rackmount DVD/CD Duplicator Front PanelFront Panel Rear Panel AC power outletRear Panel Setup Using the Rackmount DVD/CD DuplicatorCopy Function on LCD Panel Copying from the Optical Source Drive Basic OperationCopying from the Optical Source Drive Test CopyTest & Copy VerifyPrescan CompareDisc Info Select SourceCD to CD Edit Edit Track for CD onlySelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Play Audio Track CD to HDDClose Session LanguageRead Speed DVD Burn SpeedAuto Start Drive Startup MenuEject Disc Burn ModeBurn on the Fly Display TimeAdvanced Setup Adv Setup Update Firmware Read Error Skip12.9 H/W Diagnostic Format HDD12.11 CD+G Load DefaultIsrc & MCN CD-TextAppendix A. List of Functions Normal Conditions Appendix B. LCD MessagesAudio Editing How do I reset the unit to its factory settings? Appendix C. Frequently Asked Questions FAQWhat does the Target Overflow message mean? FAQ Handling Discs Appendix D. About DVD±R and DVD±RW DiscsEjecting the Disc Tray Loading and Ejecting DiscsTascam Appendix E. SpecificationsAppendix F. Technical Support
Top Page Image Contents