Tascam DV-W11R user manual Select Track +1/10

Page 22

10.1 CD to CD Edit

You can press the button to display (2) for the second (2) song, and so on.

In this example, we will choose to include the first track on our mix CD.

5.Select the first track, then press the (ENT) button.

A plus sign (+) will be displayed next to the “1/10” indicator as shown below.

Select Track: +1/10 03:25

Note: Pressing the (ENT) button again will cancel your selection.

6.Press the button to display End in the LCD panel, as shown below.

Select Track:

End 1Trk03:25

7.Press the (ENT) button to finish CD editing.

8.Press the / buttons to display Yes.

End edit disc and burn? Yes

Copying the Track

9.Press the (ENT) button.

The system starts copying the track and displays the copying information as follows:

Copying - 24X Edit 1/10 -> 1/1

In the display above, the “1/1” indicator refers to the first track selected (1) out of the total number of tracks selected (1).

When the copy process is complete, the LCD panel displays the following message:

Burn Complete!

OK: 01

14	Rackmount DVD/CD Duplicator User’s Manual

Image 22

Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Test & Copy CopyTest VerifyDisc Info ComparePrescan Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Close Session CD to HDDPlay Audio Track LanguageAuto Start Drive DVD Burn SpeedRead Speed Startup MenuBurn on the Fly Burn ModeEject Disc Display TimeAdvanced Setup Adv Setup 12.9 H/W Diagnostic Read Error SkipUpdate Firmware Format HDDIsrc & MCN Load Default12.11 CD+G CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support