Tascam DV-W11R Eject Disc, Burn on the Fly, Burn Mode, Display Time, Button Sound, Device Info

Page 27

11.10 Eject Disc

11.10 Eject Disc

The Eject Disc setting controls the ejection of discs by the target drive. Three options are available:

•Eject Good Only – This option ejects only successfully copied discs. This is the default setting

•Eject All Disc – This option ejects successful and failed copy discs.

•Do Not Eject – With this option, the disc remains in the target drive. Manual ejection is required after every copy operation.

11.11 Burn on the Fly

The Burn on the Fly function enables you to control the copy operation. When the setting is ON, data is copied directly from the source DVD to the target DVDs. When the setting is OFF, the DVD/CD Duplicator first loads the data into a partition on the hard disk drive, then copies the data to the target DVDs.

11.12 Burn Mode

The Burn Mode setting enables you to select from two writing methods for CD-R media:

•Disc At Once (DAO)

•Track At Once (TAO) DAO is the default setting.

11.13 Display Time

The Display Time function displays the total time of each copy operation. The default setting is OFF.

11.14 Button Sound

The Button Sound setting turns the button sound on or off. The default setting is ON.

11.15 Device Info

The Device Info function displays information for both the source and target drives.

Rackmount DVD/CD Duplicator User’s Manual

19

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Copyright and Trademark Information Safety PrecautionsFCC Radio Frequency Interference Regulations Piracy StatementTable of Contents Appendix A. List of Functions Appendix B. LCD Messages About This Manual List of FiguresRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel of Rackmount DVD/CD Duplicator Front PanelFront Panel Rear Panel AC power outletRear Panel Setup Using the Rackmount DVD/CD DuplicatorCopy Function on LCD Panel Copying from the Optical Source Drive Basic OperationCopying from the Optical Source Drive Verify CopyTest Test & CopySelect Source ComparePrescan Disc InfoCD to CD Edit Edit Track for CD onlySelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Language CD to HDDPlay Audio Track Close SessionStartup Menu DVD Burn SpeedRead Speed Auto Start DriveDisplay Time Burn ModeEject Disc Burn on the FlyAdvanced Setup Adv Setup Format HDD Read Error SkipUpdate Firmware 12.9 H/W DiagnosticCD-Text Load Default12.11 CD+G Isrc & MCNAppendix A. List of Functions Normal Conditions Appendix B. LCD MessagesAudio Editing How do I reset the unit to its factory settings? Appendix C. Frequently Asked Questions FAQWhat does the Target Overflow message mean? FAQ Handling Discs Appendix D. About DVD±R and DVD±RW DiscsEjecting the Disc Tray Loading and Ejecting DiscsTascam Appendix E. SpecificationsAppendix F. Technical Support
Top Page Image Contents