Tascam DV-W11R user manual Appendix B. LCD Messages, Normal Conditions

Page 32

Appendix B. LCD Messages

This appendix explains the messages that may appear on the LCD panel.

Normal Conditions

Message	Meaning

Initialize SDRAM	Initialize system memory.

Detect drives	Detect the drives connected to the system.

User Abort	Cancel a job during operation.

Analyzing	Analyze the source disc.

Source Drive Not Ready	Source drive is not ready to read.

Target Drive Not Ready	Target drive is not ready to write.

Erasing disc	The system is erasing the data on the disc.

Source Disc Not Ready	Source disc is not ready to be read.

Target Disc Not Ready	Target disc is not ready to be written into.

Fail to get Drive Info!	Drive information cannot be obtained.

Fail to get SRC Disc Info!	Information about a source disc cannot be obtained.

Save new config Fail!	The new configuration settings cannot be saved.

Load Default Config?	Do you want to load the default settings?

Src&Tgt can't in the same	During comparison, the source and target discs cannot
channel	occupy the same channel.

Preparing	The system is preparing to record.

Check Target Please Wait	The system is checking the target device.

Audio Disc!!!Can't compare!	The system cannot compare the audio disc.

Identical	Comparison results are identical.

Read disc error	During a comparison, the disc could not be read.

Cannot read TOC	The system cannot read the contents of the disc.

TOC not match	Comparison results are not identical.

Source Disc Empty!!!	The source disc contains no data.

Target overflow	The target disc capacity is insufficient to store new data.

Target Disc Not Empty!!!	The target disc still contains data.

Press a Key to Eject Good Disc	Press any key to eject a disc after copying. (Copy suc-
	cessful.)

Press a key to Eject Fail Disc	Press any key to eject a disc after copying. (Copy failed.)

DVD-RW does not Support the	DVD-RW does not support this function.
Func

Hold ESC to exit	Press ESC for one second to terminate the test.

All data will be lost, erase?	All data on the disc will be lost. Confirm erasure request.

Erase Finished	The erasing of the data is complete.

No Erasing to Disc in DVD-	The disc in the DVD-RW drive is not rewritable.
RW!!

24	Rackmount DVD/CD Duplicator User’s Manual

Image 32

Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Copy TestTest & Copy VerifyCompare PrescanDisc Info Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing CD to HDD Play Audio TrackClose Session LanguageDVD Burn Speed Read SpeedAuto Start Drive Startup MenuBurn Mode Eject DiscBurn on the Fly Display TimeAdvanced Setup Adv Setup Read Error Skip Update Firmware12.9 H/W Diagnostic Format HDDLoad Default 12.11 CD+GIsrc & MCN CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support