Tascam DV-W11R user manual What does the Target Overflow message mean?

Page 35

FAQ

5.What does the Target Overflow message mean?

This message may be displayed when the source master CD disc contains data/music in excess of the 700MB/80min disc capacity.

These types of discs are often called “Overburn” discs. Attempting to copy an Overburn disc might generate read errors at the end of the disc, making the disc unreadable in regular CD readers. Although this type of recording is not recommended, this unit is capable of duplicating Overburn discs.

Refer to “12 Advanced Setup (Adv Setup)” on page 20 for more information.

Then, execute function “12.2 Overburn” on page 20 to change the setting to the ON state. Follow the instructions to exit the Advanced Setup first, and then execute the [1. Copy function]. This time, the unit will again display the

message and prompt you to continue. Press the (ENT) button to create an Overburn copy.

This message may be displayed when a source DVD disc is copy-protected, such as a purchased/rented DVD movie/game. There is no Duplicator on the market that can copy these discs, as doing so is a violation of Federal law.

Replace the source DVD disc with a non-copy protected disc.

This message may also be displayed if the Source DVD disc has a capacity larger than the DVD disc in the target drive. Make sure that both source and target discs have the same capacity. For example, if the source DVD disc is an 8.5GB capacity disc, make sure the target DVD disc is also an 8.5GB disc.

6.What media is recommended?

For best results, brand-name media is recommended (for example: Memorex, Imation, TDK, Verbatim, Fuji-Film, etc.)

7.How do I copy a CD+G (Karaoke) disc? The CD+G feature is set to OFF as a default.

Refer to “12 Advanced Setup (Adv Setup)” on page 20 for more information. Then execute function “12.11 CD+G” on page 22 to change the setting to the ON state. Follow the instructions to exit the Advance Setup first, and then execute the [1.Copy] function.

8.How do I copy a CD Text disc?

The CD Text feature is set to “OFF” as a default. Refer to “12 Advanced Setup (Adv Setup)” on page 20.

Then execute function “12.13 CD-Text” on page 22 to change the setting to the ON state. Follow the instructions to exit the Advance Setup first, and then execute the [1.Copy] function.

Rackmount DVD/CD Duplicator User’s Manual

27

Page 34 Page 36
Image 35
Page 34 Page 36
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Copyright and Trademark Information Safety PrecautionsFCC Radio Frequency Interference Regulations Piracy StatementTable of Contents Appendix A. List of Functions Appendix B. LCD Messages About This Manual List of FiguresRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel of Rackmount DVD/CD Duplicator Front PanelFront Panel Rear Panel AC power outletRear Panel Setup Using the Rackmount DVD/CD DuplicatorCopy Function on LCD Panel Copying from the Optical Source Drive Basic OperationCopying from the Optical Source Drive Verify CopyTest Test & CopySelect Source ComparePrescan Disc InfoCD to CD Edit Edit Track for CD onlySelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Language CD to HDDPlay Audio Track Close SessionStartup Menu DVD Burn SpeedRead Speed Auto Start DriveDisplay Time Burn ModeEject Disc Burn on the FlyAdvanced Setup Adv Setup Format HDD Read Error SkipUpdate Firmware 12.9 H/W DiagnosticCD-Text Load Default12.11 CD+G Isrc & MCNAppendix A. List of Functions Normal Conditions Appendix B. LCD MessagesAudio Editing How do I reset the unit to its factory settings? Appendix C. Frequently Asked Questions FAQWhat does the Target Overflow message mean? FAQ Handling Discs Appendix D. About DVD±R and DVD±RW DiscsEjecting the Disc Tray Loading and Ejecting DiscsTascam Appendix E. SpecificationsAppendix F. Technical Support
Top Page Image Contents