Tascam DV-W11R user manual Load Default, 12.11 CD+G, Isrc & MCN, CD-Text, Use Big Block

Page 30

12.10 Load Default

12.10 Load Default

The Load Default function resets all settings to factory default values. It is recommended that you reset to the default values if the DVD/CD Duplicator fails to function properly after you make changes to the original configuration. To execute the Load Default function, follow the steps below:

1.Press and hold down the (ESC) button for two (2) seconds until you hear a beep.

2.Press the down arrow to display 12.10 Load Default.

3.Press the (ENT) button.

The system displays the message: Load Default Config? Yes.

4.Press the (ENT) button.

The system starts loading the default data. When the loading operation is complete, the system displays the message: Load Default OK.

5.Press the (ESC) button twice, then press the down arrow to return to the main menu.

The system displays 1.Copy.

12.11 CD+G

The CD+G function enables or disables CD+G (karaoke CD) format support. The default setting is OFF.

Note: The CD+G value must be set to OFF before you can use the Track Extraction features.

For more information about CD+G discs, see item 7 in the FAQ on page 27.

12.12 ISRC & MCN

The ISRC & MCN function enables or disables ISRC and MCN format support. The default setting is OFF.

12.13 CD-Text

The CD-Textfunction enables or disables the copying of CD-Text discs. The default setting is OFF.

For more information about CD-Text discs, see item 8 in the FAQ on page 27.

12.14 Use Big Block

This function is not available in the 2U Rackmount Duplicator.

22

Rackmount DVD/CD Duplicator User’s Manual

Page 29 Page 31
Image 30
Page 29 Page 31
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Test & Copy CopyTest VerifyDisc Info ComparePrescan Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Close Session CD to HDDPlay Audio Track LanguageAuto Start Drive DVD Burn SpeedRead Speed Startup MenuBurn on the Fly Burn ModeEject Disc Display TimeAdvanced Setup Adv Setup 12.9 H/W Diagnostic Read Error SkipUpdate Firmware Format HDDIsrc & MCN Load Default12.11 CD+G CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support
Top Page Image Contents