Tascam DV-W11R user manual Copy Function on LCD Panel

Page 16

Setup

4.Connect one end of the included power cable to the back of the DVD/CD Duplicator. Connect the other end of the power cable to a three-prong recep- tacle AC outlet.

Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk damage to the unit and electrical shock.

Note: This unit features an internal switching power supply, which will automatically switch within a range of 100 to 240VAC as required.

5.Turn on the power to the DVD/CD Duplicator by pressing the power button on the lower front-center of the unit.

During initialization, the DVD/CD Duplicator performs a self-test in which the unit’s internal buffer is tested, source and target drives are detected, and the LCD display is tested. Once the initialization is complete, the DVD/CD Duplicator is ready for use.

The LCD initially displays the Copy function by default.

Figure 6. Copy Function on LCD Panel

8	Rackmount DVD/CD Duplicator User’s Manual

Image 16

Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Copy TestTest & Copy VerifyCompare PrescanDisc Info Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing CD to HDD Play Audio TrackClose Session LanguageDVD Burn Speed Read SpeedAuto Start Drive Startup MenuBurn Mode Eject DiscBurn on the Fly Display TimeAdvanced Setup Adv Setup Read Error Skip Update Firmware12.9 H/W Diagnostic Format HDDLoad Default 12.11 CD+GIsrc & MCN CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support