Tascam DV-W11R user manual Edit Track for CD only, CD to CD Edit

Page 21

10. Edit Track (for CD only)

10. Edit Track (for CD only)

The Edit Track functions enable you to create and copy a collection of songs from different audio discs.

Note: The CD+G value must be set to OFF before you can use the Track Extraction feature. For more information, refer to “12 Advanced Setup (Adv Setup)” on page 20.

10.1 CD to CD Edit

You can use this function to copy tracks from one or more discs and burn them to a CD-R.

The CD to CD Edit function enables you to select specific tracks from various audio discs, combine them to create a collection of songs, and copy the collection to blank CD-R/CD-RW discs.

Note: CD-R discs support up to 80 minutes of audio. Therefore, the number of tracks that can be copied onto a single disc depends on the length of each individual track.

1.Insert a source disc into the source optical drive and a blank CD-R disc into the target drive.

2.Switch to function [10.1 CD to CD] by pressing the button.

3.Press the (ENT) button.

The LCD panel displays the following:

10-01. Edit Track CD to CD Edit

Selecting a Track from the First CD

4.Press the (ENT) button again.

The LCD panel displays the following:

Select Track: 1/10 03:25

In this example, the indicator “1/10” refers to the first (1) of 10 tracks. The value “03:25” indicates the duration of the track.

Rackmount DVD/CD Duplicator User’s Manual

13

Image 21
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Copyright and Trademark Information Safety PrecautionsFCC Radio Frequency Interference Regulations Piracy StatementTable of Contents Appendix A. List of Functions Appendix B. LCD Messages About This Manual List of FiguresRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel of Rackmount DVD/CD Duplicator Front PanelFront Panel Rear Panel AC power outletRear Panel Setup Using the Rackmount DVD/CD DuplicatorCopy Function on LCD Panel Copying from the Optical Source Drive Basic OperationCopying from the Optical Source Drive Test CopyTest & Copy VerifyPrescan CompareDisc Info Select SourceCD to CD Edit Edit Track for CD onlySelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Play Audio Track CD to HDDClose Session LanguageRead Speed DVD Burn SpeedAuto Start Drive Startup MenuEject Disc Burn ModeBurn on the Fly Display TimeAdvanced Setup Adv Setup Update Firmware Read Error Skip12.9 H/W Diagnostic Format HDD12.11 CD+G Load DefaultIsrc & MCN CD-TextAppendix A. List of Functions Normal Conditions Appendix B. LCD MessagesAudio Editing How do I reset the unit to its factory settings? Appendix C. Frequently Asked Questions FAQWhat does the Target Overflow message mean? FAQ Handling Discs Appendix D. About DVD±R and DVD±RW DiscsEjecting the Disc Tray Loading and Ejecting DiscsTascam Appendix E. SpecificationsAppendix F. Technical Support