Tascam DV-W11R user manual Appendix C. Frequently Asked Questions FAQ

Page 34

Appendix C. Frequently Asked Questions (FAQ)

The following FAQ section may help you to resolve some common problems.

1.How do I reset the unit to its factory settings?

Refer to function “12.10 Load Default” on page 22. Carefully follow the step- by-step instructions.

2.When I tried to copy a disc, the LCD displayed Source Disc Empty!!! and the target drive’s tray was ejected simultaneously. What should I do?

The factory settings may have been changed. Reset the duplicator to the factory default settings. Refer to function “12.10 Load Default” on page 22. Carefully follow the step-by-step instructions.

3.What does the Target Drive Not Ready error message mean?

This message is displayed when the target drive is not ready to record because, for example, a blank disc is dirty or scratched. Clean the target disc. If it has been scratched, replace it with a new one.

Try using a different brand of disc to make sure that the failure is not related to disc specifications or quality.

You may also encounter this problem if you try to use a disc that is not blank. (The Rackmount DVD/CD Duplicator accepts only blank DVD/CD discs in the target drive).

This message may also be displayed if the source disc is copy-protected. In such a case, insert a disc that is not copy-protected. In accordance with applicable laws, the Duplicator is designed to be unable to bypass any copy- protection technology that may be encoded on the source disc.

If the error message continues to appear even with different target or source discs, contact our Technical Support Group.

4.What does the Source Drive Not Ready message mean?

This message is displayed when the source (upper) drive is not ready to read because, for example, the master disc is dirty or scratched. Clean the source disc. If it is scratched, use a different source disc.

The message may also be displayed if the source disc is empty. Be sure to insert a data/music/video disc in the source drive.

This message may also be displayed if the source disc is copy-protected. In such a case, insert a disc that is not copy-protected. In accordance with applicable laws, the duplicator unit is designed to be unable to bypass any copy-protection technology that may be encoded on the source disc.

If the error message continues to appear even with different source discs, contact our Technical Support Group.

26

Rackmount DVD/CD Duplicator User’s Manual

Page 33 Page 35
Image 34
Page 33 Page 35
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Safety Precautions Copyright and Trademark InformationPiracy Statement FCC Radio Frequency Interference RegulationsTable of Contents Appendix A. List of Functions Appendix B. LCD Messages List of Figures About This ManualRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel Front Panel of Rackmount DVD/CD DuplicatorFront Panel AC power outlet Rear PanelRear Panel Using the Rackmount DVD/CD Duplicator SetupCopy Function on LCD Panel Basic Operation Copying from the Optical Source DriveCopying from the Optical Source Drive Test & Copy CopyTest VerifyDisc Info ComparePrescan Select SourceEdit Track for CD only CD to CD EditSelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Close Session CD to HDDPlay Audio Track LanguageAuto Start Drive DVD Burn SpeedRead Speed Startup MenuBurn on the Fly Burn ModeEject Disc Display TimeAdvanced Setup Adv Setup 12.9 H/W Diagnostic Read Error SkipUpdate Firmware Format HDDIsrc & MCN Load Default12.11 CD+G CD-TextAppendix A. List of Functions Appendix B. LCD Messages Normal ConditionsAudio Editing Appendix C. Frequently Asked Questions FAQ How do I reset the unit to its factory settings?What does the Target Overflow message mean? FAQ Appendix D. About DVD±R and DVD±RW Discs Handling DiscsLoading and Ejecting Discs Ejecting the Disc TrayAppendix E. Specifications TascamAppendix F. Technical Support
Top Page Image Contents