Tascam DV-W11R user manual Using the Rackmount DVD/CD Duplicator, Setup

Page 15

Setup

Chapter 2. Using the Rackmount DVD/CD Duplicator

This chapter explains how to set up the Rackmount DVD/CD Duplicator. It also explains basic operation and menu functions.

Note: The following instructions are applicable to TEAC and TASCAM branded Rackmount DVD/CD Duplicators. The primary differences between models are the TEAC or TASCAM logo on the LCD Control Panel and the model number on the corresponding nameplate label. Please refer to “Specifications” on page 31 for detailed information on your model.

Setup

1.Carefully remove the DVD/CD Duplicator unit, AC power cord, warranty card, optional rubber feet and user’s manual from the shipping box.

Note: Please keep the original box and packaging materials for use in the event of future storage or transportation of the unit.

2.If the unit will not be mounted onto a rack, you may wish to affix the four included rubber feet to the bottom of the Rackmount DVD/CD Duplicator. Then skip Step 3 and proceed directly to Step 4.

3.To rack mount the DVD/CD Duplicator, leave a 1U of space above it and 4 inches (10cm) or more of space at the rear. Use a rack-mounting kit (not included) to mount the unit in a standard 19-inch equipment rack, as illus- trated below. If rubber feet are currently affixed to the bottom of the unit, remove the rubber feet before you attempt to mount the unit in a rack.

Figure 5. Installing the DVD/CD Duplicator in a Rack

Rackmount DVD/CD Duplicator User’s Manual

7

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Copyright and Trademark Information Safety PrecautionsFCC Radio Frequency Interference Regulations Piracy StatementTable of Contents Appendix A. List of Functions Appendix B. LCD Messages About This Manual List of FiguresRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel of Rackmount DVD/CD Duplicator Front PanelFront Panel Rear Panel AC power outletRear Panel Setup Using the Rackmount DVD/CD DuplicatorCopy Function on LCD Panel Copying from the Optical Source Drive Basic OperationCopying from the Optical Source Drive Verify CopyTest Test & CopySelect Source ComparePrescan Disc InfoCD to CD Edit Edit Track for CD onlySelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Language CD to HDDPlay Audio Track Close SessionStartup Menu DVD Burn SpeedRead Speed Auto Start DriveDisplay Time Burn ModeEject Disc Burn on the FlyAdvanced Setup Adv Setup Format HDD Read Error SkipUpdate Firmware 12.9 H/W DiagnosticCD-Text Load Default12.11 CD+G Isrc & MCNAppendix A. List of Functions Normal Conditions Appendix B. LCD MessagesAudio Editing How do I reset the unit to its factory settings? Appendix C. Frequently Asked Questions FAQWhat does the Target Overflow message mean? FAQ Handling Discs Appendix D. About DVD±R and DVD±RW DiscsEjecting the Disc Tray Loading and Ejecting DiscsTascam Appendix E. SpecificationsAppendix F. Technical Support
Top Page Image Contents