Tascam DV-W11R user manual CD to HDD, Play Audio Track, Close Session, Language, CD Burn Speed

Page 25

10.2 CD to HDD

19.Press the / arrow buttons to display Yes, then press the (ENT) button.

Once you indicate that you wish to close the session, the LCD panel will display the message as follows.

Closing Session

Please wait...

Note: You must close the session for the CD before you can play the CD.

10.2 CD to HDD

Since the 2U Rackmount Duplicator does not feature a hard disk drive, please disregard this option.

10.3 Play Audio Track

This function is not available.

10.4 Close Session

This function finalizes your CD-R disc. Once the CD-R disc is finalized, no more audio can be added to that disc.

11 Setup

The Setup menu includes a list of options that enable you to change the original default configuration. Various settings are available under the Setup menu that control the operation of the DVD/CD Duplicator. However, it is recommended that you use the original default settings for optimal operation.

11.1 Language

The DVD/CD Duplicator LCD panel can display text in English and Spanish. The Language function enables you to select the display language. English is the default option.

11.2 CD Burn Speed

The CD Burn Speed setting controls the writing speed of the target drive when recording onto CD-R/CD-RW media. The default value is AUTO, which writes at the highest speed allowed by the media.

Rackmount DVD/CD Duplicator User’s Manual

17

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 2U Rackmount DVD/CD Duplicator User’s Manual Page Copyright and Trademark Information Safety PrecautionsFCC Radio Frequency Interference Regulations Piracy StatementTable of Contents Appendix A. List of Functions Appendix B. LCD Messages About This Manual List of FiguresRackmount DVD/CD Duplicator User’s Manual Introduction Rackmount DVD/CD Duplicator Package Contents Front Panel of Rackmount DVD/CD Duplicator Front PanelFront Panel Rear Panel AC power outletRear Panel Setup Using the Rackmount DVD/CD DuplicatorCopy Function on LCD Panel Copying from the Optical Source Drive Basic OperationCopying from the Optical Source Drive Test CopyTest & Copy VerifyPrescan CompareDisc Info Select SourceCD to CD Edit Edit Track for CD onlySelect Track +1/10 If you choose not to continue, select No, then skip to Step System will then ask if you want to continue editing Play Audio Track CD to HDDClose Session LanguageRead Speed DVD Burn SpeedAuto Start Drive Startup MenuEject Disc Burn ModeBurn on the Fly Display TimeAdvanced Setup Adv Setup Update Firmware Read Error Skip12.9 H/W Diagnostic Format HDD12.11 CD+G Load DefaultIsrc & MCN CD-TextAppendix A. List of Functions Normal Conditions Appendix B. LCD MessagesAudio Editing How do I reset the unit to its factory settings? Appendix C. Frequently Asked Questions FAQWhat does the Target Overflow message mean? FAQ Handling Discs Appendix D. About DVD±R and DVD±RW DiscsEjecting the Disc Tray Loading and Ejecting DiscsTascam Appendix E. SpecificationsAppendix F. Technical Support
Top Page Image Contents