Lexicon 960L owner manual Analog and Digital I/O, System Screen

Page 36

Operations in Detail

Lexicon, Inc.

Control Mode: Clocks, Configuration, and System Screens, continued

Analog and Digital I/O

The 960L may be set for either analog or digital input. In the Configuration examples shown above, the inputs are analog, as shown by the legend "AN1" above each input number. To select digital input, use the Navigation arrows to activate any Input Control, and press either the Increment (+) or Decrement (–) key. The input legends will change to "AES 1" (Figure 4-10). Note that all inputs are set to the same input type. The type can be set from any Input Control, and all inputs will change when a selection is made.

Note: The + and – keys both act simply as toggles when selecting input types; it does not matter which you press.

Although inputs to the 960 must be all analog or all digital, the processor always produces both analog and digital output, mapped channel for channel. As a reminder, all output channels carry the legend A&D (Figure 4-11).

Figure 4-10 — Legends for Analog input (left)

 

Figure 4-11 — All channels feed both analog

and AES/EBU Digital input (right)

 

and digital outputs.

 

 

 

System Screen

The system screen is useful for showing the software revision that is currently operating. If you ever need to

call your dealer, distributor or Lexicon Customer Service with questions about your 960L, make sure you know all the revision information.

Figure 4-12 — Control Mode, System Screen

4-8

Image 36
Contents 960L. Digital Effects System Important Safety Instructions Table Of Contents Table Of Contents Introduction Title of SectionMainframe Description Rear PanelAbout the 960L Unpacking the 960LClock Card Midi Connectors Five-pin DIN female Remote-Control ConnectorsMains Power Switch IEC Power ConnectorStandby Switch and Indicator Front PanelFloppy Drive ThumbscrewsBehind the Front Panel DSP-Card SlotsCPU Card Installation MountingVentilation LocationDigital Audio Connections Midi ConnectionsWordclock Connections LARC2 Remote Navigating Typical Display ScreensLARC2 Remote About the LARC2Unpacking the Larc LARC2 Control Surface LARC2 Control SurfaceGetting What You Want LARC2 ConnectionsNavigating Typical Display Screens A typical display screenMode Faders Joystick About the Faders and JoystickAudio Indicators Fine AdjustLexicon Button Basic Operation AN Overview of the ControlsBasic Operation An Overview of the ControlsSetup Control Mode Quick Guide to Operation960L Owner’s MaunalBasic Operations Quick Guide to Operation Machine Selection Program LoadingEditing a Program or Register Storing Your EditsName screen Info screens are similar Control Mode CLOCKS, Configuration Operations in DetailLoading Programs and Registers Loading ProgramsLoading Registers Alternative Loading TechniquesProgramming Machines Control Mode Clocks, Configuration, and System Screens WordclockInput, Output, and Machine Configuration Locked and unlocked wordclock960L Owner’s Maunal Operations in Detail 44.1/48kHz Dual machines 5-in and 2-in Output Assignment Left Right Center Unused Surround Surround Analog and Digital I/O System ScreenFine Adjust EditingEditing Algorithms Editing With the FadersEditing with the Joystick Quick Comparisons via the Lexicon ButtonEditing Inputs and Outputs Input PanningOutput Panning Setting Levels 960L Surround Panning RulesAvoiding Overload Using the Edit Algorithm Screen V-Page and Parameter ReassignmentFrom the Edit Algorithm, Inputs, Outputs Options screen 22 Edit V-Page screen programming the joystick Storing and Labeling Your Edits StoringNaming and Annotating 25 a Register Info Options Enabled Organizing Your RegistersMachine Mode Using the Floppy DriveCD-ROM Edit Tools for RegistersUsing the Reverb Programs Using the Reverb Programs Reverberation and RealityUsing The Reverb Program Lexicon, Inc Reverberation and Reality Msec Sound in Space a Short History of Stereo and Surround Algorithms Random HallSurround Hall ChamberPlate & Surround Plate Ambience & Surround AmbienceAmbient Chamber Reverse & Surround ReverseInverse Parameters Used in the 960L Algorithms Using The Reverb ProgramLexicon, Inc FbckL FbckRFbckLF FbckLSLvLL LvRRLvLR LvRL LvLFLFRearRoll RearRvbRShape RSpreadSize SlopeSpin SpreadMidi Nomenclature Midi Channel AllocationChannel Usage Description Card Configuration Bank and Program MappingBank Description Program # DescriptionMidi Sysex Incoming Inquiry Midi Byte Description960Ls response Midi Implementation Chart Specifications Specifications Connector 48K Rack Units96K Factory ProgramsLARC2 User Interface Appendix Appendix Program Descriptions HallsAppendix B1 P4 B3 P4 B6 P2 B7 P2 B9 P9 B11 P5 Empty Mini Chamber Similar to Snare Chamber, but even smaller Lg Brite Room Random Hall Simply large and bright Echo Plate Like Flat Plate, but with echoes Stereo Bank Kitchen Chamber Can you find your disposal sound effect?