Operations in Detail | Lexicon, Inc. |
Editing, Continued
The V-Page and Parameter Reassignment
•Press the EDIT key on the LARC2 control surface.
•Press the
•Use the Navigation Arrows to highlight the Type or Parameter to change. (You can also select a fader or joystick axis with the Numeric Keypad, but you still have to navigate to the Type or Parameter.)
•Make your selection by cycling through the available Types or Parameters with the +/– keys or touch the fader of the desired parameter. The types are: "None", "Algorithm", "Input", and "Output". Some algorithms can have more than 50 parameters.
•The fader or joystick axis is now assigned to whatever parameter you’ve selected.
Using the Edit Algorithm Screen
This alternate method is a useful shortcut: If you’re in the midst of editing algorithms, inputs or outputs, it enables you to quickly pick a parameter and assign it to a fader or the joystick.
•Push the EDIT key, then the ALGORITHM soft button, which brings up the Algorithm Edit screen. This holds all the parameters for the current algorithm, in up to ten "pages" of up to eight parameters apiece. (The highlighted down- arrow to the right of these pages shows that there are more pages below the screen; these pages can be reached by scrolling with the Navigation Arrow keys – or, if you know the
number of the page you want, entering that number on the Numeric Keypad.)
•Pick the parameter you need from this menu by navigating to it , which will highlight it.
•Press the Options soft button. This changes the soft buttons to "SELECT" (used for selecting algorithms),
Note: In Edit mode, the parameters and settings on the Scribble Strip are not a
On the Main Operating Display, parameters assigned to the
From the Edit (Algorithm, Inputs, Outputs) Options screen:
•Pressing the
Note: You must already have selected a parameter before you get to this screen.