Insignia NS-LCD22 manual Using your television

NS-LCD22.fm Page 8 Monday, February 19, 2007 1:39 PM

		Insignia NS-LCD22 LCD TV
	press ENTER to confirm.	Using your television
2 Press or to select Component, then
3 Turn on your device and set it to the correct		Using the Remote Control
	mode.	Use the remote control by pointing it towards the
		television’s remote sensor window. Objects
	Note
		between the remote control and sensor window
	For more information about using your component
	video device, see your user guide.	may prevent proper operation.

Connecting a computer

	VGA cable
To monitor port	(analog
(15-pin VGA)	RGB)
To audio output jack	Audio cable (stereo
	mini plugs)

TV rear

To connect a computer:

1Connect a VGA cable between the VGA jack on the computer and the VGA input jack on the television.

2Connect an audio cable between the AUDIO input jack on the television and the AUDIO output jack on the computer.

To play video from a computer:

1Turn on your television, then press the INPUT button. The SOURCE INPUT menu opens.

2Press or to select VGA, then press ENTER to confirm.

3Turn on your computer and adjust the display properties as required.

Connecting headphones

Headphones

TV side

To connect headphones:

•Insert the headphone plug into the television’s headphone jack.

Warning

To avoid hearing damage when using headphones, adjust the headphone volume to avoid excessive levels.

Caution

•Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity.

•Do not install or place the remote control under direct sunlight. The heat may cause deformation of the television.

•The remote control may not work properly if the remote sensor window of the main television is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or television set, or operate the remote control closer to the remote sensor window.

Note

This illustration is for reference only. The remote sensor may be in different locations on different models.

Turning the television on and off

To turn the television on:

1Insert the power cord into the wall socket.

2Press on the remote control or television. The television turns on.

To turn the television off:

•Press on the remote control or television. The television turns off.

Viewing the menus and displays

This television has an easy-to-use menu system that appears on the screen. This system makes it convenient and fast to use features on the television. You can also display the status of these features while watching a program.

8 www.insignia-products.com