Insignia NS-LCD22 manual Selecting the input signal source, Displaying the information banner

NS-LCD22.fm Page 9 Monday, February 19, 2007 1:39 PM

Insignia NS-LCD22 LCD TV

To navigate the menu: Selecting the input signal source

1With the television turned on, press the

	MENU button. The main menu opens.	To select the input signal source:
2	Press or to select a menu page.	1	Press INPUT. The SOURCE INPUT menu
			opens.
3	Press ENTER or to enter that menu page.
		2	Press or to select the input source.
4	Within the menu, use , , , or to

navigate through the options or adjust an option. Press ENTER or to confirm a setting, enter a sub-menu, or toggle the settings of the selected menu item.

5 Press MENU to return to the previous level menu, or press EXIT to exit the main menu and return to your program.

Note

Menu items that are not selectable are grayed out.

Displaying the information banner

To display the information banner:

•Press the DISPLAY button to display the information banner. The information banner displays status information such as the channel number and signal source. Depending on the mode, different information is displayed. In DTV mode, more information, such as the channel number, channel name, and signal resolution can be displayed.

Selecting the on-screen menu language

To select the menu language:

1Press MENU.

2Press or to select Setup menu, then press ENTER or to access the submenu.

3Press or to select Menu Language,

then press ENTER or to select the language.

4Press EXIT to return to watching the television.

Options include:

•TV—Watch the TV signal.

•Composite (or S-Video)—Watch the signal from the AV INPUT or S-Video terminals.

•Component—Watch the signal from the COMPONENT INPUT terminals.

•VGA—Watch the signal from the VGA jack.

•HDMI—Watch the signal from the HDMI input jack.

3Press ENTER or to select the input source.

4Press EXIT to return to watching the television.

Memorizing the channels

When you turn on the television for the first time, you should perform an auto channel search to set up the stations on your television.

Note

Be sure to select the TV source input before completing this procedure.

Selecting the tuning band

Before your television can memorize the available channels, you must specify the type of signal source that is connected to the television, such as antenna or cable.

To select the tuning band:

1Press MENU.

2Press or to select Setup menu, then press ENTER or to access the submenu.

www.insignia-products.com 9