Dolby Laboratories Digital-Satellite-Receiver manual Switching DiSEqC on or off

Page 21

>Confirm by pressing OK.

The menu Settings will be displayed. (Fig. 6-7)

>Now use the arrow keys up/down to select the line Antenna Configuration.

>Confirm by pressing OK. The menu Antenna

Configuration will be displayed. (Fig. 6-8)The following settings may be made in this sub-menu:

6.4.1 Switching DiSEqC on or off

DiSEqC (Digital Satellite Equipment Control) is a digital swit- ching signal used to control DiSEqC-compatible components via the antenna cable. If your external installation incorpora- tes DiSEqC components, you must switch on (enable) the DiSEqC control:

>In this line, use the OK key to select DiSEqC on or off.

As only one LNC can be addressed if the DiSEqC control is switched off, the menu is restricted to the configuration of a single LNC.

6.4.2 Setting the switching matrix

The menu lists the four switching criteria of the DiSEqC con- trol. Your receiver is pre-programmed so that ASTRA will be received on the position A/A and Eutelsat on the position B/A of a multiswitch. If the switching matrix of your receiving installation is set up differently, or if you are receiving other satellites, proceed as follows to adjust your digital receiver to the requirements of your receiving installation.

>Use the arrow keys to select a DiSEqC switch posi- tion (1-4) you wish to allocate to a particular satellite (e.g. A/B 3 No Satellite), by simply marking this line.

>Confirm by pressing OK.

A selection table listing various satellites will be displayed.

>Use the arrow keys up/down to mark the appro- priate satellite.

The arrow keys up/down will move the marker up or down one line at a time, the arrow keys right/left will move forward or backward one page at a time.

If the satellite you seek is not included in the list, plea- se select one of the reserve slots, designated User 1 to User 14.

>Confirm by pressing OK. The satellite selected will now be added to the menu Antenna Configuration at the position previously marked.

(Fig. 6-7)

(Fig. 6-8)

Example:

A	B	A	B
Position		Position
Ausgang		Ausgang

A B

Option

Ausgang

21

Image 21

Contents DIGITAL- Satellite-Receiver Index Page Only with devices with this equipment Illustrations Remote controlVCR Page Important notes on operation Please read this firstWhen not in use Safety notesVCR Connections Mains power connectionExternal unit Connection to a television setOn RF cables Video cassette recorder VCRHi-fi amplifier Getting started initial installationSerial interface RS AnalogueMenu/OSD language Position A/Option a After the Search Basic settings SettingsMenu language Parental control functionOSD Setting schematic Audio/Video settingsTime difference to GMT hours CountryTV Scart mode Language Audio signalPicture format TV set Language Sub-titlesUHF output channel Antenna configurationSetting the switching matrix Switching DiSEqC on or offAdditional Settings/LNC properties Switching on and off OperationRotating antenna Using the numeric keys Using the Programme up/down keysUsing the programme list Programme selectionInformation box Calling up blocked programmesSpecial functions Reception of encrypted programmesMultifeed options Time managementParental Control Volume control Smartcard PIN-CodeChanging the Smartcard PIN code TV/Radio switching Dolby Digital AC3 modeSelecting a different language Display time and programme information Return to last programme selectedAdditional Programme information Transponder informationUsing the teletext decoder of your television set Using the internal teletext decoderTeletext Sub-titles Electronic Programme Guide SFIDownloading SFI data Now Table of current programme contents Interrupting the downloadViewing the Electronic Programme Guide More NextSFI Functions SFI InformationMarking a programme Recording a programme Timer operationSFI overview by programme type genre SFI Programme overviewTimer Programming the TimerExiting SFI Only for receivers equipped with this feature Deleting timer programming Changing timer programmingConfiguring the Favourites list Changing the basic programmingCalling up the Navigator Adding programmes to Favourites list Sorting programmes Deleting from the Complete listPlease note Programming the electronic programme guideBlocking programmes Parental control Searching for programmes Changing the receiver PIN codeSatellite Search Automatic SearchSatellite Searching on a transponderAfter the Search Manual SearchService settings Restore Factory SettingsDelete all programmes Updating Software SFI ChannelCopy settings System configurationOperation in conjunction with a rotating antenna DiSEqC Conditional AccessEastern and Western limits Deleting existing limitsSetting Eastern limit Setting the Western limitGeo-positioning Played. Fig Setting a user-defined satellite position Setting the satellite positionAdjusting the satellite antenna Configuring the test transponder and LNCManual positioning of antenna Storing a satellite position Automatic detail adjustment AutofocusDeleting a satellite position Current satellite listReference position Selecting a satellite positionDVB Technical TermsAstra FEC Technical DataTV Scart Requirement Problem Possible cause Solution Trouble-shooting guideProblem Possible cause Solution Programme selection Using the programme up/down keys Switching on and offVolume control For daily use