Dolby Laboratories Digital-Satellite-Receiver manual Teletext, Using the internal teletext decoder

7.12 Teletext

7.12.1Using the teletext decoder of your television set

Where broadcast by the provider, teletext will be transferred to your television set. To operate the teletext function, use the remote control of your television set. Should you experience problems with your television set, such as an overlap of tele- text and picture content, you should set your digital receiver to CVBS mode (Point 6.3.4).

7.12.2 Using the internal teletext decoder

As an alternative, you can utilize the integrated TOP teletext decoder to display information. The TOP teletext system groups together all text pages in groups and blocks according to subject matter, which makes the system more managea- ble.

>	Select the programme on which you wish to view tele-
	text information.
>	Press the teletext key to switch on the teletext (Fig.
	7-15).
>	Use the numeric keys to enter the teletext page
		(Fig. 7-15)
	you wish to view. Your entry will be displayed in the
	upper left corner of the screen. When you have enter-
	ed the desired teletext page, your receiver will search
	for this page.
	Since not all teletext pages can be transmitted simul-
	taneously, it may take a few seconds for your unit to
	find the page and display it on your television screen.
	All teletext providers utilize page 100 for their index.
>	Use the red resp. green keys to move forward or
	back one page at a time.
>	Press the yellow function key to call up the teletext
	group indicated in the yellow field.
>	Press the blue function key to call up the teletext
	block indicated in the blue field.

Mixed mode

>Pressing the key teletext again will switch the screen display to mixed mode (simultaneous display of the teletext information as well as of the TV pictu- re). Press this key again to exit from mixed mode.

Stop mode

>Press the Stop key; the message Stop will be displayed in the top left corner of the teletext window. This will prevent the automatic continuous paging of the teletext sub-pages. Press the Stop key again to exit the Stop mode.

>Press Back to return to normal operation.

31