(Fig.
(Fig.
8.4.3 SFI Channel
Your receiver has the facility to receive a data channel via the ASTRA satellite systems (19° East) carrying additional SFI data. These facilitate a SFI (programme guide) preview for up to a week in advance.
>Press OK to call up the
(Fig.
>To receive the data channel, mark the line SFI Update.
>Press OK to select On.
>Use the numeric keys to set the time at which the automatic download of SFI data is to be carried out in the line Update time.
>To initiate the updating of SFI data manually, press the red function key Start now.
If you do not wish to receive the additional data, or are unable to receive it because of your location, the reception of data can be switched off:
>To switch off the reception of data, set SFI update to off. This means that only the programme information
provided by the individual channels will be available. If the parameters of the data channel used to download the SFI list have changed, you can correct that in this menu. The current transponder data can be obtained from your specialist retailer. Generally, no changes should be made in this menu.
8.4.4 Updating Software
You also have the facility of updating the operating software of your digital receiver via satellite (ASTRA 19° East).
>Press OK to display the
To perform a software update, mark the line
Software download.
>Set the software update function to on by pressing
OK.
>In the line Download time, use the numeric keys to set the time when the software update is to be car- ried out.
>To initiate the update for the operating software manu- ally, press the red function key Test.
>Press the Menu key to return to normal operation.
If the parameters of the data channel used to download the software updates have changed, you can correct this manual- ly in this menu as described under Point 8.3.4 (manual pro- gramme search). The current transponder data can be obtai- ned from your specialist retailer. Generally you should not make any changes in this menu.
50